Woodworking Bed Plans

Woodworking is a hobby pursued and enjoyed like any other hobby. It is true that in order to enjoy this hobby, you need to learn it and also master some of the tips and techniques. Woodworking is all about creativity, activity and patience. Right from toys and wooden blocks to desks and beds; one can simply create anything out of wood. You can even include kids in these activities and let them contribute in bits and parts. Making beds of wood is an advanced project.

Making Wooden Bed

The procedure for making bed of wood is very lengthy, and hence, I have mentioned here one of the easiest plan that is easy to follow. So, now let us take a look at the methods on making a wooden bed at home.

Things Required

• Plywood
• Wood screws
• Nail gun
• Saw
• MDF
• Sandpaper
• Wood putty
• Wood oil
• Safety goggles

Directions

• Firstly, you need to decide on the measurements that you require for the bed. For that purpose, it is wise to take the measurements of the bedroom and then decide on the actual size of the bed that you will require.
• Cut 2x10 pieces of lumber of equal length and breadth.
• You should drill holes in these pieces to screw holes.
• Now, screw all the pieces together to make a square shape structure.
• Next, small pieces of 2x10 should be cut to go in between the each section of the base.
• The centerpiece of the 2x10 should be offset as it is essential to secure it into the place.
• Now, you need to secure all these sections together using screws and by directly using the nail gun.
• To make the top of the frame, you need to cut 2x4 pieces of plywood 5-8 inches longer than the 2x10 pieces.
• Next, you should make a square shape with the 2x4 pieces and secure using screws.
• Place 3-4 2/4 pieces across the width of the frame and secure with screws.
• Put equal parts of 2x4 pieces of in between each section of the base for support.
• Similarly 5 pieces should be placed along the length of the frame for support.
• Now, place the top section of the frame on the base at the bottom. You will need to secure it with screws or pre-drill holes.
• Next, put 2 pieces of MDF on the top of the frame. Secure with the help of screws.
• Lastly, you need to sand the entire wood to make it smooth. You can also fill the screw holes with wood putty if you wish.
• The oiling and waxing can be done according to convenience and preference. You should note that after oiling or waxing, the bed should be kept for 24-30 hours before placing mattresses on it.
• You can also go through wood carving techniques to decorate your newly made wooden bed.

This was one of the easiest ways of making a wooden bed at home. You will find many other woodworking bed plans on the Internet. You can print them and follow them to explore more of your creativity. Good luck!