Wood Stove Installation: How to Install a Wood Stove?

What is a Wood Stove?

Wood stove can be defined as the appliance that is wither made up of steel or cast iron and it uses wood as its fuel. At times the stoves can be attached to a blower that would help to keep the surroundings smoke free. Nowadays wood heating is becoming increasingly popular since it provides sufficient heat and new technologies have helped wood stoves to get over its drawbacks. But then with the newer technologies coming in the block the procedures have become much more complicated than before. Installing wood stoves needs expert advice and suggestions. To get the best performance the old stove should not be attached to a chimney and start using it.

Which is the safest Wood Stove?

If you are looking for a safe wood stove then it is better to get a good and highly efficient stove accompanied by a chimney, which is certified by the EPA or Environmental Protection Agency. For increased efficiency one should also get a venting system that would suitably match the stove. When the stove and the chimney are efficient enough, the responsibility of safety solely lies with the operator who has to be the least careful when handling the stove.

Tips on Installation of Wooden Stoves

Before suggesting the tips for installation it is essential to inform that a wood stove requires maintenance very regularly since there are creosote depositions. Therefore there should be regular inspection and cleaning of the ashes.

• The first thing that has to be done is to get that there are no flammable substances around the stove. There are stoves available that come with clearance certificates and specify the distance between the stove and the combustible surfaces like the sidewalls, floor and the ceiling. The clearance standards would be different for every stove. So it is better that you read the manual that is provided with the appliance.
• The floor on which the stove is to be kept also has to be non-combustible since that would save it from the embers that might fly off the stove when it is in use.
• Also decide your requirement that would determine the size of the stove and its location.
• The chimney of your stove should have sufficient capacity, right height and also should be away from all the combustible things. Like the stove the chimney should also be placed in a proper location.
• Choose a proper stove, which has proper scope to be attached with a chimney.
• Do not use waxed wood since the type of wood you use also determines the way your stove functions.
• Always remember that the stove should not be kept in the basement since the ventilation is poor from a basement which leads to over-heating of the space. Consequently that leads to wastage of fuel and the effort by the stove to function properly even in the absence of optimum conditions leads to over strain of its internal parts.
• When connecting the stove to the chimney do use a heavy gauge pipe that should be ideally 24 gauge. The pipe should be as short as possible and all the joints should be secured with metal screws so that there aren’t any chances of an accident.
• The chimney lining should be made up of stainless steel so that it can take high temperatures since the average temperature in case of a wood stove in not less than 400 degree Celsius.
• It is better to use a solid pack or insulated chimney that would also increase the efficiency if the stove.

There is another important that one should keep in mind when getting one such appliance which is to get a fire extinguisher installed at the same time. These are the tips that one should remember when getting a wood stove installed in one’s house.