Which Child Safety Gates are Better: Permanent of Pressure Based

Although it is not a pleasant simile but a crawling baby or a toddler is like a prowler looking for trouble. Howsoever much you try you cannot keep your baby confined to a place. Child safety gates can give the peace of mind that is evading you ever since the baby left the confines of your lap and started crawling.

Here is a critical assessment of the two types of child safety gates available for childproofing your home.

Permanent Child Safety Gates

Basic Information

This type is similar to normal gates that you may have installed in the house. The design for permanent child safety gates is only shorter in height. Once installed these are secure and cannot be knocked down by the child. The safety lock ensures that it will not open by itself. Most designs comprise of vertical slabs make from wood, coated steel or aluminum tubing secured by rails at top and bottom.

Where To Install Permanent Child Safety Gates

These are ideal for second storey setting where you want to prevent your child from falling down. To add to the safety these open only one way that is away from the stairs. Some permanent child safety gates designs allow you to choose the direction you want them to swing.

Installation Of Permanent Child Safety Gates

These are fixed with screws sunk in the wall. You drill holes in the wall or a door frame and secure the gate with brackets and screws. When it is time to remove the gate you can cover the holes with appropriate putty and fill them. Some designs allow you to simply remove them from the mounting hardware as and when you want.

Pressure Mounted Child Safety Gates

Basic Information

This type of child safety gates stay fixed in an opening by pressure against the walls of a door frame. These have two sliding panels for a proper fit and you have to remove or slide them to walk through. Another option is a door that swings open. These do not require any hardware for installation as they rely on pressure to stay in place.

Where To Install Pressure Based Child Safety Gate

Since there is a risk of these getting knocked down if leaned upon it is better to install them in less dangerous areas such as between rooms. The kitchen is one place that you would like to restrict your baby’s entry due to the obvious reasons. Do not ever use pressure based child safety gates on top of stairs.

Installation of pressure child safety gates

No hardware is required and you have to simply adjust the gate to fit in the opening by squeezing it.

Regardless of which type you choose, make sure that the slats are less than 2.5 inches apart to avoid the baby’s head getting stuck into them. Also check the product for juvenile safety certification and pay special attention to sturdy construction and smooth finish.

Get valuable tips and advice on baby safety gates to have a sound and robust baby safety practices that will sure help you baby proof your home.