When to Replace Timing Belt
Timing belts are common trouble causing car components. For proper functioning of the car and its engine, periodic timing belt replacement is necessary. But how does one determine its lifespan? Here's an answer.

Determining When to Change the Timing Belt
There are some noticeable symptoms that can decide. One of the best way to check out for any sign of problems in your timing belt is to open the hood and check for yourself. But, here are some indirect signals that should be looked out for.
Excessive Exhaust Emission
A problem-causing timing belt can ruin the functioning of a car's engine, and causes excessive emission of exhaust smoke. This is caused when the time belt fails to synchronize the closing of exhaust valve. This leads to unused gases being released through the exhaust. So, if you notice this sign, it may be because of a timing belt problem.
Hassled Starting of the Vehicle
If you have a problem with starting a car, the timing belt may be malfunctioning. There are many other car problems that can cause this symptom and hence it may be ambiguous. Nevertheless, if you regularly face this problem, then get the belt checked.
Overheating and Leaking Engine
Extreme temperatures in the engine or hot weather can cause damage to the timing belts, which are mainly made of rubber. As a result, the engine does not work in synchronization, and there may be engine overheating followed by leakage. In such a case, one is left with no option but to consider the time when to replace timing belt.
Abrupt Change in Engine Noise
Another symptom which some car drivers might notice is, unusual engine noise caused by the belt. At the slightest inkling, get it checked with an auto service station where a mechanic might suggest you a time frame on when to change the same.
Replacement of Timing Belt
Here are some tips or a procedure for one of the easiest ways to replace a timing belt. But, is strongly advised to take professional help for the purpose. This is surely not a 'do it yourself' procedure and you should go for it only if you have a thorough knowledge of all the vehicle parts and carrying it out under some expert supervision.
- Let the vehicle cool down to normal temperature and disconnect the car battery from the engine.
- Detach all the parts that would hinder you while removing the old timing belt.
- Now, use a spanner and bring the mark on the crankshaft to the zero timing scale mark on the engine block.
- Remove the bolts holding the timing chain and remove its cover. Check the seals of the crankshaft and camshaft, tensioner bearings, all the zero timing markings. If any of them are damaged, replace immediately, or the new timing chain will fail in a short time.
- Now, remove the new chain and adjust the tension according to the specifications of the manufacturer. Connect a new gasket to this timing belt and verify the timing marks.
- Attach all the other parts that were detached earlier and also reconnect the battery to the engine.
- Restart the engine and then check if any of the belt problem symptoms are still present. If you want to know how long does it take to change timing belt, the answer would depend on how much expertise do you have on this job.
Like This Article?
Follow:

Post Comment


