Using Water for Fuel

What is Water4gas? There has been a lot of interpretation on it and some has taken to believe it or reject it as a scam that is designed to take advantage on those unhappy with the hike in fuel price. The question now is, is it really something that will work to our advantage?

Many people think that Water4gas is a type of machine that you can buy and install in your vehicle. This is not true. Water4gas is actually information on how you can convert your car to run on water either fully or partially.

This system will benefit you in many ways such as it will help save money and the engine of your vehicle. Here are more benefits that you can gain in using this system:

Water4gas merely informs you on how to create or build a mechanism that can just be added to your car’s hood. This will not damage your car in any way because you can also easily take it out.

Under normal circumstances, the unburned fuel will leave carbon residue in your engine. By using the Water4gas system that generates steam, it will help cleanse the engine. Therefore, Water4gas will save your engine.

Water makes it unlikely for the engine to overheat.

This system is found to have lessened engine knocking therefore, your vehicle will run more smoothly and your journey less tense.

It also widens torque range. This means that your car will be able to accelerate faster!

The overall performance of your engine will increase. Now, a vehicle that has good engine will less likely to contribute to air pollution.

To start, simply place a 950cc sized container under your car’s hood. This container must be filled with distilled water and s bit of baking powder. This is all you need to nip water and electricity and generate HHO. By having this, you will be well on your well to convert fuel to water. So there; you don’t need to be a mechanic or an engineer to do this.

You will need the following materials (which can be bought in most regular hardware stores) to begin your way to a more efficient and less expensive road to traveling.

1. The Hydrogen Generator – Water4Gas uses spiral electrodes that produces more HHO while conversely consuming much less energy from your battery.

2. MAP Sensor Enhancer – it is responsible for the reduction of fuel consumption. This device does not apply any changes on your car’s engine or computer.

3. Vaporizer – A vaporizer helps keep the engine cool and therefore leaving room for better combustion and higher fuel economy.

4. Fuel Heater – Pre-heats your gasoline which will help cut costs. The Fuel heater will only use energy which comes from your generator (energy that is usually wasted).

5. PCV Enhancer – The Positive Crankcase Ventilation protects your engine.

6. Fuse holder and wiring

7. Vacuum T-connector – It aids in the feeding of hydrogen and oxygen into your engine.

8. Vacuum hoses (2 pieces; 3.5 feet each) – One will be used to connect to the intake manifold while the other to the air filter.

9. Mechanical installation hardware

10. Catalyst (usually in the form of baking soda) – It is the substance which separates water into HHO.

This device that will be assembled together will be able to convert water into HHO or otherwise known as Brown’s gas or Hydroxy. HHO has the ability to burn gas at a tremendously better rate than diesel or other gasses alike. To better help you understand the process, look up on Hydrogen Fuel Cell conversion.

Water4gas is not a ready to install device for your vehicle. It is an informative guide that will help you turn your engine into something that safe valuable fuel energy as well as improving the performance of your vehicle. Just be sure to follow the instruction and find out more about the parts your are uncertain about in order for it to be a success.