Timing Chain Replacement
You don't need to perform a timing chain replacement frequently. However, over a period of time, when the timing chain starts malfunctioning, you need to look into this matter, as your vehicle would show signs that a replacement is needed. This article explains the procedure of a timing chain replacement, and also acquaints you with some other related aspects.

Signs Indicating Need for Timing Chain Replacement
The timing chain normally works efficiently and hassle-free for a long time without maintenance and repair, however, it needs to be replaced at some point of time eventually. Usually, it needs to be replaced anywhere between 75,000 to 100,000 miles of running the car. The following are instances that would indicate the need for timing chain replacement.
- Vehicle vibration
- Delayed and difficult ignition
- Excessive firing
- Frequent overheating and leaking of the engine
Procedure for Replacement of Timing Chain
Before moving on to the procedure for timing chain replacement, let me tell you that this is actually not a 'do it yourself' procedure! You should go for it yourself only if you have thorough knowledge of all the vehicle parts, and are also confident enough to do this procedure all alone. If both the prerequisites are fulfilled by you, then you can start the procedure.
- Let the vehicle cool down for the entire day or at least overnight. Disconnect the vehicle battery from the engine.
- Detach all the parts that would come across your way while removing the old timing chain. You need to remove the water pump pulley, air intake assembly, and all the other parts that might create an obstruction.
- Now, with the help of a spanner, bring the mark on the crankshaft pulley to zero timing scale cast on the engine block.
- Take out the bolts on the timing chain and pull out its cover. Inspect the crankshaft and camshaft seals, tensioner bearings, and all the cast timing markings. If any of them are damaged, replace immediately, otherwise the new timing chain would fail in a short time.
- Now take out the new chain and then adjust the tension as specified by the manufacturer. Attach a new gasket to the timing chain and then perform a check on the timing marks.
- Fix all the other parts back that were removed earlier, and also connect the battery to the engine.
- Turn on the vehicle and then check if any of the above given symptoms are still prevalent.
If you are not confident enough to do the above mentioned procedure by yourself, then you should take your vehicle to a mechanic (this is actually a better idea). The mechanic would inspect the vehicle properly and then take the necessary steps to fix it. The cost of replacing a timing chain is somewhere around $300 - $700. The cost actually depends upon the location, other complications in the vehicle if any, and the maintenance or replacement (if necessary) of other parts associated with the timing chain. The purchase price of the new timing chain and also the time required for the entire procedure decides the eventual cost of the timing chain replacement.
Even though you have got an idea of the timing chain replacement procedure as well as the timing chain replacement cost, I would say that you should perform the above procedure only if you are very much sure about what you are doing. Otherwise, the best way is to take your vehicle to a professional mechanic, and he will do the entire work for you. After all, your car maintenance is not something that you can compromise on, in any way whatsoever!
Like This Article?
Follow:

Post Comment | View Comments


