Standing Seam Metal Roofing

If you would like durable, fire-resistant and lightweight roofing then a metal roofing product is the answer. Completely customizable, standing seam metal roofing is easy to install and looks very beautiful on any building with the fact that it carries all the properties other metal roofing solutions have.

Why metal roofs?

Standing seam metal roofs have many benefits, here are some of them:

• Lightweight: Metal roofs are lightweight compared to tiles at 750 pounds per square or a concrete tile at 900 pounds per square. Most metal roofing is 50 to 150 pounds per square.
• Weatherproof: The panels in a standing seam metal roof are joined together by a watertight seam that is raised above the roof’s drainage system. Organic sealants are applied at the factory during roll forming of the panel, once the roofing comes on site, automatic field sealing machines complete the seal. All these processes ensure that the standing seam metal roof is designed to withstand snow, wind and rain.
• Less maintenance required: Standing seam metal roofs offer years of trouble-free performance with little or no maintenance expense or time.
• Durable: The concealed sliding chip system in the standing seam roof handles thermal shock. It does this using a rigid base that is attached to the building’s structural members. Movement in either direction is possible because of this chip.
• Conducts heat:Midday heat is minimized because metals radiant heat from the sun. Many systems use a dead-air space between the roof deck and the metal roof in order to increase energy efficiency.

Are standing seam metal roofs corrosion resistant?

Aluminum, zinc or the aluminum-zinc alloy metal coating that is applied to metal roof panels help resist corrosion. Specially pigmented organic paints that harmonize the roof with conventional concrete, brick and wood sidewall materials can offer additional protection. Architects use popular beige and earth-tone colors to coordinate the roof with other design elements of the building.

What are the different materials used for roofing?

The different materials used for roofing are:

• Aluminum: This is an extremely lightweight material that is used in much metal roofing. This metal does not rust but is painted or coated for appearance. The coatings used on this metal are similar to those used on steel.
• Copper metal shingles: This metal is long lasting and visually striking.
• Stainless steel: This is a metal that is very expensive and does not corrode or rust. A natural, matt-gray finish is achieved on stainless steel using the terne coating.
• Steel: Steadier and heavier than aluminum, manufactures use a number of durable coatings and finishes to protect steel from corrosion and rust.
• Copper: This is metal that does not rust and is soft and easy to tool. Regrettably this metal is very expensive.

What is the installation process for standing seam metal roofing?

Since the installation process for standing seam metal roofs is a difficult process it is better to hire professional contractors. The installation for standing seam roofs is done in a method that water can sweep down the roof without much difficulty. These metal roofs can be customized in such a way that when they are cut in the factory they are cut according to the requirements of the building where they are going to be installed.