Pool Deck Resurfacing

Are you bored of the pool deck that surrounds your pool? Does it seem to wear off day by day, and seem even more dirty and ugly? Well, here is what really happens to a pool deck.

The deck of the swimming pool is subject to maximum weathering and wear and tear. The pool deck is subjected to many different natural weathering elements, like the sun, rain, wind and in some cases, even snow. This same deck is also subjected to wear and tear, that is inflected by man. Whenever the swimming pool is used, the water that splashes out also causes pool deck erosion. The constant exposure of the pool deck, makes moss and a number of microorganisms accumulate on the deck. As the pool deck grows older, you will notice several dark patches growing on the surface.

When you see such kind of patches on the pool deck, then it is time for you to have the pool deck resurfaced. Pool deck resurfacing is a relatively simple process, where the surface of the pool deck is replaced with a new one. One must note that during the process of resurfacing, the foundations of the pool and its deck are not disturbed. The following are some of the prominent pool deck resurfacing methods.

Stone Finish
Stone finish is a very convenient option due to its durability. The stone finish pool deck resurfacing is done by embedding large stones, finely cut into a layer of concrete. This type of pool deck resurfacing, is probably the best type of finish, as it not only looks good, but has many advantages over the other methods of pool deck resurfacing. The stone finish type of decks are highly effective due to the durability that they offer. Another very good advantage of these types of surfaces, is that they provide a very good natural friction. This natural friction proves to be very useful, as it is almost slip proof.

Stamped Concrete Finish
Stamped concrete is another very widely used pool deck resurfacing method. This type of resurfacing is very common, due to the fact that is is very easy and also cheap to resurface the pool deck with the help of stamp concrete. This type of surface is very similar to the stone finish. However, it does not have the same charm, friction and level of comfort. One of the demerits of stamp concrete finish, is that it is very inconvenient and costly to repair or replace this type of surface.

Wooden Finish
Among the swimming pool deck resurfacing options, the most expensive is the wooden finish of the pool deck. The wooden finish is also very expensive to repair and requires a lot of care. Installing and using such a pool deck requires a rather huge budget. The wooden deck provides a very good amount of friction and is also slip proof.

Brick and Tile Finish
The brick and tile finish is a very good and cheap option, that is being used for pool deck resurfacing. This surface provides a very good amount of friction when you walk on it and is also slip proof. The surface is very durable and can also be repaired easily.

Before opting for a pool deck resurfacing, one must remember, that any kind of surface requires a lot of care. Keep in mind the pros and cons of all the surfaces when you make your pool deck design plans. Keeping the surface clean and also in regular use ensures durability, though one cannot fully avoid the microorganic growth on the surface of the pool.