Pond Liner Repair
Pond liners add a beautiful touch to the pond and makes it look more distinct. They also increase the durability of your garden pond. Repairing the pond liners can be a difficult job if not done with proper care. The following article guides you about pond liner repair.

Pond Liner Repair
There are various types of pond liners available in the market each having its own characteristics. Pond liners are actually very low on the pocket if they are maintained with proper care. Pond liner repair is an easy job when you have mastered how to repair a pond liner. The most famous types of pond liners are the flexible pond liners and the rigid pond liners. The flexible pond liners are made up of strong and flexible materials like plastic that can last for almost 20 to 25 years. These pond liners come with special UV protection, that increases their durability. Still, there comes time when one or the other smallest task of pond liner repairs comes in the way. There are a few things to keep in mind for pond liner repair.
For small pond liner repairs that take less time and efforts, you can always use the pond liner repair tapes. The pond liner tapes are specially designed to repair the smallest of tears and holes that are visible over the pond liner. You can always use single sided pond liner tapes (6 inch tape), for the same. Before starting the smallest task of pond liner repair, make sure that you have removed all the water and the rough materials from the pond. Clean up the pond liner by using naphtha or such cleaners. Apply the tape on the affected area by giving even pressure on all sides of the tape.
Plastic Pond Liner Repairs
Plastic pond liner repairs are also a tough job to perform without having enough information about plastic pond liner repair. Repairing pond liner will not be too difficult after applying the following instructions.
Pond Liner Repair Material
- Black water tank (holding tank)
- Quality primer
- Patch material
- Glue
- Remove all the fish as well as the plantation from the pond and place them in the black water tank. Drain out the water from the pond and make sure that the pond liner is dry, before you begin the procedure of pond liner repair.
- Clean up all the algae or such matters from the surface of the pond liner. Never pull the pond liner out of the pond as it might create problems on its reinstatement.
- Apply primer on the affected area. Before applying the glue, make sure that the primer is totally dried off. When the glue is partly dry, stick the patch material over it and press until it is attached firmly to the glued surface.
- Let the pond liner stand for at least 6 hours before the follow-up of the damaged area. If there are more signs of the damage, then you will have to repeat the whole procedure all over again.
Like This Article? Please Share!

Post Comment


