Mold and Colds - Does Toxic Mold Cause More Colds

The terms are in the same sentence because mold symptoms are very similar to cold symptoms. It can be said that mold and colds are put together because black mold can make you sick. The bodies lack of antibodies from the mold symptoms will a breakdown and system failure.

Both mold and colds are common when there is to many toxinc in the system that it cannot break them down. These toxic symptoms from black mold have been known to cause fungisitis, which is known as black mold in the nose. Colds become a habitual implication. The excess mucas which has spores will create fungus that can be harmful to the system, especialliy if immuno-compromised. Aspergillus and stachybotrys are very popular and known to cause mold and colds. Stachybotrys and aspergillus are very common house hold molds that can grow indoors, if not correctly managed they can pose a health problem.

If one is looking to prevent mold correctly and good mold removal techniques, one should take action immediately and go through the correct mold removal techniques. For example, if you have wet dry wall and it is not removed properly, within a couple of months you may see mildew begin to grown on the surfaces of the drywall. After the mildew begins to grow and attach on the surfaces they will soon to liberate toxins into the air which your family can inhale. This is a common occurence that causes problems with people associating mold symptoms and colds.

With colds, usually it is from immunity problem, stress, or over working and quite a few other things. When there is mold spores inside the body this causes more work for the body causing one to get sick. The mold spores will breakdown the body and most likely a cold is around the corner. Your nose becomes stuffy and mucas begins to become excessive. The best thing to try is meeting with a doctor who understands toxicology and you may want to look into an alternative solution such as an all natural mold removal productor hiring a certified mold inspector to look at the area, they will then write protocols for a qualified mold remediation and decontamination company.