Leather Braiding Instructions

Leather fabric has a unique charm. It is commonly used in footwears, sacks, diaries, bracelets and many other accessories to give an elegant look. Leather furniture, leather clothing, leather bags and many other leather goods are much adorned by people for their awesome look.

Sometimes, leather is braided to enhance its look. The braided belts look very stylish. They are worn not only to fit the waist perfectly, but also tied around the waist over tops and kurtas to enhance the outfit. The leather braiding techniques are very easy to do. You can try them and decorate a variety of items like household decor, clothing and accessories. Though the light and dark brown-colored leather is considered to have an all time best appearance, you can also color the leather to have an even more variety in the braided leather. There are many free leather braiding lessons available to help you have that funky braided leather done.

While there are several leather braiding methods and instructions for leather braiding, three-strand braid is one of the most easy to create. The three-strand braided leather bracelets are popular among youngsters. They match with any outfit and give that hep look to the person wearing it. Here is the three-strand leather braiding instructions.

Three Strand Leather Braiding Instructions

Step 1: Choose a leather color you wish. Make sure it is thin enough to work out the leather braiding techniques comfortably.

Step 2: Decide the breadth of the leather to be braided. Now, cut the leather to the chosen breadth. The length should be carefully measured. If you take leather of 11 inches in length, it will shrink up to 8 inches after braiding. So considering this, take a few inches extra than the required length.

Step 3: Measure a length of 3 inches from the top side of the leather. Now, cut the leather in between to form 3 straps, leaving top 3 inches uncut. Make sure the three strips so formed are equal in width. The 3 inches of uncut leather at the top will keep the strips connected.

Step 4: You can color the straps. You can use colors depending upon the use of this braided leather. Also, you can use same color for each strap or use a different color for each one. This is the most creative part of the leather braiding techniques.

Step 5: Now, lay the leather in front of you in a vertical position.

Step 6: With the help of a pipe clamp, clinch the top of the leather strap.

Step 7: Hold the outer two strands of leather in your right hand and the middle strand in your left hand.

Step 8: Cross the middle strand below the left one. Now the strand which was previously on the left is in the center.

Step 9: Bring the right strand over the center strand of the leather.

Step 10: Repeat Step 8 and then repeat Step 9.

Step 11: Work your way down the piece of leather following Step 8 and Step 9 respectively.

Step 12: Once you come towards the end, make sure all the leather straps are nicely interlocked. For this, pull the leather straps tightly each time you move them above or below the other one. This will make the belt look fuller or else there will be holes between the belt.

Step 13: Hold the ends and knot them together. Your three strand braided leather is ready.

Online leather braiding instructions can guide you in making leather crafts, waist belts, hair bands or bracelets. You need to change the dimensions of leather used in each case according to your requirement. These leather braiding techniques can help you enhance the pattern and beauty of your leather goods.