Installing a Lawn Sprinkler System - How to Install Lawn Sprinkler

A lawn sprinkler is a garden tool used to water the lawn, as well as plants and shrubs in the vicinity. There are two main types of lawn sprinklers. In-ground sprinklers, which are routed through the trenches dug in the ground, and hose-end sprinklers, connected by a pipe over the ground. An in-ground sprinkler system, when installed properly, is much more effective than the hose-end sprinkler system. Though you can buy a sprinkler system and install it with the help of a professional, it is fun to install a lawn sprinkler system on your own.

Preparatory Work When Installing a Lawn Sprinkler System
The foremost thing you need to do is to consider the dimensions of the area, wherein you are installing a lawn sprinkler system. Take the required measurements, and survey the land to make sure that there are no underground cables or pipelines, which can be possibly damaged when you dig the ground to install the sprinklers. You can use a rolling tape to take the measurements. Take a graph paper, and map your property on it. Make sure that you include all the landmarks on the property in this map, including the decks trees, driveways and fences. More importantly, mark the water sources in your property on the map. Based on this, you can plan the layout of the lawn sprinkler system. You will also need to buy tools such as sprinkler head and pipes. A sprinkler head is the device attached to the pipeline in the sprinkler system, which rotates to sprinkle water in all over the lawn. Sprinkler heads come in various shapes and sizes, each sprinkling water in variable amount and pressure. You can choose a piece depending on the location of plants and shrubs, size of your lawn, and its water requirement. You can consult a specialist in case you are not sure about how much water your lawn would need.

How to Install Lawn Sprinkler?
When installing a lawn sprinkler system, plot it according to directions of flow rate and water pressure given by the manufacturer. When there are more than one sprinkler, make sure that each sprinkler's throw rate, overlaps the other. Based on the layout prepared by you, divide the sprinkler system into various circuits. Next, you can build the manifold, which will connect the main water line, and divert water to each circuit. Dig trenches to accumulate the pipes. These trenches need to be 8 to 10 inches deep. Install the pipes and make sure that they are straight and in the same level. When connecting the system to the main water line, attach a shutoff valve and a anti-siphon valve, to make sure that the water doesn't go back into the line which supplies water at home. After these things are completed, install the risers at an angle of 90 degrees from the ground. The sprinkler heads should be located at proper heights. Mount the controllers and connect the low voltage wire to the connections valves, in order to set the control. Before refilling the trenches you can test the system to locate faults, if any. Now that you have finished installing a lawn sprinkler system, you can reseed the area that was dug to have a beautiful lawn.

Lawn sprinkler is one of the most important tools required for lawn care. A beautiful lawn adds to the grace of your property, and knowing how to install lawn sprinkler can help you to grow this beautiful lawn, without undergoing the tedious task of watering it manually everyday.