How to Test a Car Battery
A car battery is the power house of a car. It powers all the electrical systems of a car, including the ignition system. This article talks about how to test a car battery by simple inspection and voltage measurement.
Working Of a Car Battery
To test and diagnose a car battery problem, one needs to have a little insight into its working. A car battery is an electrolytic cell, designed to store electrical energy in the form of chemical energy and convert the chemical energy back into electrical energy, when required. It is a battery of six individual cells, each supplying about 2.1 V of electricity. So when joined in series and charged, they provide a voltage of 12.6 V approximately. The anode and cathode used in these cells are lead oxide (PbO) and sponge lead (Pb) respectively and the electrolyte used is dilute sulfuric acid.
There are two processes that occur in a car battery: the charging process and discharging process. The charging process converts the electrical energy input into chemical energy. The discharging process converts the chemical energy back into electrical current output. When a load is connected across a battery, the circuit of the electrolytic cell is completed. The circuit is completed by flow of current in form of cations and anions in the cells and in form of electrons through the external circuitry.
The key to maintaining a good battery output is to maintain the chemical balance of the cell. Water is an important factor in the chemical reaction inside the cell. Dropping water levels in a car battery can cause the voltage output to lower down. If the battery is overcharged, some extra chemical reactions may occur which otherwise, do not. This hampers the reversibility of the chemical reaction. That is, the charging/discharging processes that are reversible reactions cannot occur anymore. Therefore, overcharging the battery should be avoided by monitoring the voltage levels while charging.
Car Battery Testing
The only way to gauge a battery's performance is to test the voltage output it is offering. The output voltage levels that it provides with and without load can give you an idea of battery health.
So to test a car battery, arm yourself with a voltmeter and set the dials on the 0-50 V range. Disconnect the battery from the car connections by following the details in the car manual to the word. While doing so attach a 9V alkaline battery to the car PCM as otherwise it loses its programmed settings.
Connect positive red lead of voltmeter to positive of battery terminal and the black lead to the negative terminal. Check the voltage level. If its in the range of 12.6 to 12.8, your battery is doing well and adequately charged. Anything below that like 10 V or lower means it is in need of charging.
Now reconnect the battery and start the car. Keep it in idling mode and check the voltage reading between the same points again. If it is around 10V, then the battery is okay. Anything below 10 V means that either the car battery needs charging, or some other problems are causing the voltage decline.
Next thing to check is the fluid levels in the battery. To do this you must disconnect the battery again of course. Open up the battery cover and peep into the compartments of cells inside. The electrode plates should be submerged in the electrolytic fluid. If they are not, you must add distilled water to the cell compartment only uptil the fluid level rises about a one fourth of an inch above the plate. Another reason causing low battery charging may be, due to car alternator problems. Get it checked with the mechanic as soon as possible.
Thus, you can check and test your car battery with ease, armed with just an humble voltmeter and a discerning mind! Dealing with your car problems, on your own, is a satisfying experience.

Use the feedback form below to submit your comments.

Use the form below to email this article to your friends.

- Car Battery Testing
- Troubleshooting Car Electrical Problems
- Car Alternator Problems
- How to Increase a Car Engine's Horsepower
- Car Engine Problems
- Guide to Replace a Car Alternator
- Car Starting Problems
- Car Overheating Problems
- Car Brake Problems
- 7 Common Causes of Car Tyre Wear
- Troubleshooting Car Problems
- Decorative Car Floor Mats
- Common Car Problems
- Keeping Your Car in Tip-Top Shape for Winter
- Guide for Car Care
- Custom Car Seat Covers
- Why More And More People Are Buying Car Parts Online
- Velour Seat Covers: Custom Seat Covers to Add Zing and Style to Your Car
- Get Branded Dashboard Covers: Prevent UV Rays from Entering into Your Car
- Custom Car Covers: Fascinating Varieties
- Automatic Transmission Problems
- How Often Should You Rotate Your Tires
- Transmission Slipping Symptoms
- Transmission Flush Problems
- Window Tint Removal Cost
- Window Tinting Cost
- Window Tint Removal
- Automatic Transmission Fluid Change
- Automatic Transmission Troubleshooting
- Brake Caliper Replacement
- Symptoms of a Bad Fuel Pressure Regulator
- Decorative License Plates
- Symptoms of a Bad Throttle Position Sensor
- Fuel Injector Problems
- How to Change a Tire



