How to Refill Ink Cartridges

Remember the times when things had to be actually written down and copies of that document were made using xerox machines. But since almost the past couple of decades or more, computer printers and the advanced printing have made our life so easy! You can get any number of copies of a document you want at the click of the mouse. Using them has become a part and parcel of the daily work of the professionals. So it is always an advantage if you know how to use printers. You don't need to do anything much when you are just giving the 'print' command on the computer or laptop. The real challenge occurs when the printer cartridge has to be dealt with, for refilling the ink. In case you want to know how to refill ink cartridges, well the text below will 'fill' you in with the details . So read on!

Refilling Ink Cartridges

Get hold of ink (compatible with your printer) and syringe which has a capacity of 2 ml to 5 ml. If you are using color, use RGB. Now that we have ticked what we need for refilling the cartridges, let us see the process for doing that.

Step #1
Separating or detaching the empty cartridge from the printer is the first thing which needs to be done. Never ever try to refill the ink cartridge when it is docked to the printer. This applies to inkjet cartridges too!

Step #2
Now expose the needle of the syringe by removing the syringe cap. Be very careful while handling the needle. Now puncture the top of the ink bottle. Then what you need to do next is to invert the bottle and pull the plunger for getting the ink in the barrel of the syringe.

Step #3
After you have pulled out 2 to 3 ml of ink, place the ink bottle on a flat surface for pulling the needle out. Pull the needle out slowly, as if the ink is splattered, you might have a tough time dealing with stains! With regards to how to refill ink cartridges, this is a must-remember.

Step #4
Refillable ink cartridges typically have a port on top, which can be punctured easily with the needle. The port is normally covered under the sticker label. You will need to feel the port with your fingers first.

Step #5
While you are finding where the port is, under the label, avoid removing the label completely. You need the label to tell you about the brand and the type of cartridge. Otherwise there is a chance that you may get the wrong ink. You would surely not want that to happen, right, when it comes to how to refill ink cartridges?

Step #6
Close the hole which you have punctured using a sticky tape after you have injected the ink in the cartridge. Finally, all you have to do now is to replace the cartridge! That's it!

Just to check if the refill has been done properly, get a test print out of a page. Consider your task done if the print out is as good as it used to be earlier! Oh and if you think this is not your 'thing', you can ask the person who has set up computers on your office or from whom you have bought your computer as to where can I get my ink cartridges refilled. Then getting ink cartridges refilled won't be a hassle!

That is all about how to refill ink cartridges! I am sure after going through this you would not find ink cartridge refills an arduous task! However there are some issues connected with this, for instance, some brands have ink cartridge refill kits which are made of low-quality ink, leading your photographs or text, look totally different and perhaps even shocking than what you had expected it to be. That is one thing you need to take care of! I sign off here!