How to Lay Linoleum Flooring

Linoleum is prepared by oxidizing linseed oil. After which, it is mixed with pine resin and wood flour to get a finished product. Linoleum flooring being inexpensive and sturdy is the best alternative to stone and wood flooring. This flooring is versatile, durable and it can also resist high amount of moisture. This flooring is used in entry rooms, bathrooms and kitchens. These tiles can definitely enhance the look of your bathroom flooring. These days, people also use it in bedrooms and living rooms. If you are planning to install them, you can either buy it in a roll form or in the form of tiles. But, tile form is more popular, as it is easier to install. You can also try tiles of different colors, which can help you give a unique and elegant look to your home decor. You can mix and match these tiles, which will give a unique look to your whole house.

How To Lay Linoleum Flooring : Materials Required

• Linoleum
• Adhesive
• Notched trowel
• Steel flooring roller or similar tool

How to Lay Linoleum Flooring : Procedure

The first and foremost step is to check if the layment where you are going to place linoleum flooring is clean and free from dust, debris or any kind of dirt. Along with this, you will also have to make sure that the floor is free from nails and staples. If the layment is not clear and plain, then you can think of putting a plywood on it. This will create your base for linoleum flooring.

Now, you can begin with the actual process of laying linoleum flooring. Find out and mark the center of the room. If you have linoleum roll, then you can cut it down according to the size of the room. Before cutting, it is advised to know the actual and exact measurement of the room. To be on the safe side you can cut ½ inch extra linoleum. The next step is to unroll this linoleum flooring. If you come across any obstacles like pipes or vents while laying the roll it is better to remove them. After you have unrolled the linoleum and placed it on the floor, the next step is to unroll half of it and apply adhesive to it. After applying adhesive, gently lay it on the floor. Repeat the same process for the remaining part of linoleum flooring as well. After you have applied adhesive to the whole roll and after you have completely laid it, smoothen it and remove air bubbles if any. Start smoothening it from the center of the room. Use a floor roller to check if there are any air bubbles and see if the linoleum roll has stuck well. If you have opted for linoleum tiles, then the process is pretty much simple, as you do not have to roll and unroll. You will have to put adhesive to individual tiles and stick them. Start from the center of the room and then move outwards towards the walls. For marking the center of the room, choose one wall, measure the width of the wall and mark its center. Similarly find the center of the opposite wall and mark its center. Draw a line starting from the center of one wall and ending at the opposite center. Follow the same procedure for the remaining two walls. The point where the two lines meet is the center of the room.

This was all about how to lay linoleum flooring. The process of installing this flooring is simple and it also requires less amount of time.