How to Install Roof Shingles

Roof shingles are coverings which can be installed on the roofs and they usually consist of individual overlapping elements. The elements which are used as roof shingles are generally flat rectangular shaped and are laid in rows without their edges overlapping each other. These are also water resistant in nature and thus, they are used to protect houses which are situated in heavy rain regions. Roofing shingles are made from many different materials like wood, asbestos-cement, slate and ceramic many a time. There are fiberglass-based asphalt shingles and paper-based ones which are also used as a choice for installation. It is very easy to install these shingles, but it takes a lot of time. Take a look at the following steps which show you how to install roof shingles in an easy way.

How to Install Roof Shingles on a Shed

When you decide to install roofing shingles for your home, you have to make a choice on which type of shingles do you want to install. After selecting the type, also find out which are the more inexpensive ones, if you are on a low-budget. Before moving on to how to install roof shingles, there are a few materials you will need to arrange. These materials are;

• Tar paper
• Shingles and nails
• Measuring tape
• Chalk line
• Heavy duty shears or vinyl cutters
• Hammer

Steps for Roof Shingle Installation

• To start with how to install roof shingles, we need to take a tar paper to scheme out the installation properly and skillfully. Therefore, start laying the roofing felt paper first at the bottom of the roof and then build it up to the top with overlaying sheets. You can do this, by using nails and galvanized screws.
• According to roofing shingles reviews, installing asphalt shingles instead of metal, wood or slate, will surely be an easy job. Once the roofing felt is secured, you can start nailing the shingles into the tar paper. The first layer has to be the strongest so it is done by cutting off the tabs and nailed to the bottom.
• You have to make sure that the shingles valley does not leak and so, the first layer has to be strong to hold up the rest of the roofing shingles installation. For this reason, make a chalk line measurement for every horizontal and vertical arrangements that you make.
• After the first row is installed, the second row of shingles goes quickly as the measurements taken are to be chalked well before you install. Continue doing this for the all the next rows till you reach the top of the roof. Once the last row of shingles are installed right to top of the roof, you will have to install the ridge roll. Nail all the shingles to the ridge and nail the ridge to the base of the roof.
• Since these shingles are installed to give the house protection from rain and snow, it is necessary to use the nails and the tar paper which are also of good weatherproof materials. For extra strength to the roof to stand, the shingles have to be nailed in a particular place. You also have to make the right choice of types of roofing shingles as they help protect your home.
• Installing roof shingles is thus an easy job, but the only thing you have to take care of is, to make sure the base of these roof shingles are installed well. This is because, the rain and moisture can make this base weak from the top to the bottom of the roof leading to loss of resistance.

Shingles are a very useful application for houses which need to be protected from severe weather conditions. From the above mentioned steps on how to install roof shingles, you can try doing them yourself anytime. Using a schematic representation of the roof and the shingles is always more useful, so before you start try making one of these.