How to Install an RV Awning

RV generally is a vehicle very popular in the United States. Recreational vehicles are widely used, as they are furnished with living amenities and also have a sufficient room for living. The availability of a kitchen, bedroom, bathroom and a living room make them the 'Home on Journeys'. The origin of recreational vehicles dates back to the earlier period of the nineteenth century in Europe, when wagons carrying goods were modified to provide space to live in. RV in the later years improved a lot and today, you can hire a top class luxurious RV.

An RV awning is a shade attached to the external part of any of the side of the RV or travel trailer. The use of awnings is not a recent one. Man has been using awnings since ancient times. Awnings became popular during the earlier half of the nineteenth century in North America and since then, have been widely used throughout the continent. RV awnings provide a cool shade outside and make your halt more comfortable. Therefore it is good to have an RV awning installed, but if you are wondering how to install an RV awning yourself, read the following steps:

Steps in RV Awning Installation
Installing an RV awning is not a difficult job. All you need to do is know the proper procedure and have all the tools at hand.

Material Required
For installing an RV awning you require an RV, RV awning track, deflapper tool, some screws and an RV awning.

Procedure to install an RV awning

• Consider the dimensions of your RV before selecting the awning. Awnings are available in different sizes; therefore the one that fits and suits your RV only, should be selected.
• Purchase the RV awning track and install it to the top railing shell frame of your RV with the help of screws.
• Once you install the RV awning track, start with the installation of the RV awning. Care should be taken that the RV awning does not block the windows, rooms or any of the doors of your RV, therefore while fixing the nails ensure that there are no windows or any wirings blocking the way.
• Now, perform a check on the proper installation of the awning and its track.
• To avoid flapping of the awning due the force of the winds, stretch the awning properly. In order to create a suitable tension, face towards the awning, hold the tube of the awning in your hands and pull the tube slightly downward towards you.
• Do you know how to open an RV awning? Very simple! You just need to carefully open the awning and slide its upper arms.
• Next, fasten the knobs of the upper arm of the awning.
• Further, open the support legs of the awning with sufficient space to bend. Take care that you do not completely straighten the legs of the RV awning.
• Now, although you have created a suitable tension in the RV awning, strong winds can still make it flap. To avoid this and to hold the awning material firmly, fix a clamp to the upper support arm of the awning.
• The awning tie-down straps and stakes are normally included in the awning kit. These are used to hold the awning properly. Fix the stakes in the ground at an angle of about 45 degrees and at a suitable distance from the support arms of the awning. Take care that the distance is neither too large nor too short to disturb the tension in the awning.
• Next, attach the straps till the length of the awning tubes.

The RV awning is fixed and ready for you to relax!

I believe you have got a satisfactory answer to your question of how to install an RV awning yourself. Installing an RV awning is really not difficult and now when you have a properly set procedure available, it won't even take much time. Maintaining and repairing the RV awning regularly is also necessary, as due to frequent use, it might start flapping and also might not remain secured firmly to the ground. You could avail the RV awning repair instructions manual with the awning kit itself. So install the RV awning, lounge under it and just enjoy your vacation. Bon Voyage!