How to Hang Drywall

The method used for creation of ceilings and interior walls with gypsum plaster that is pressed between paper sheets is known as drywall. An alternative to traditional plaster, the drywalls can be installed in less time. The process of hanging drywall is easy, provided that the correct steps are followed and measurements are done with accuracy. Let us have a look at the different procedures of this home improvement technique. The procedure to hang drywall on concrete should also be learned, so that it proves to be useful for designing the basement.

Procedure to Hang Drywall on Walls
The materials required to hang drywall on walls are a hammer, drywall nails and sawhorses. The place to be chosen for working should have enough light.

The stud wall locations need to be marked properly on the floor and ceiling. It helps in easing out the process of nailing, later on. After finishing the marking process, drywall should be cut to appropriate size. Drywall can be applied either in a perpendicular or horizontal manner. In the method of hanging drywall perpendicularly, a single sheet which runs from the floor to ceiling is used. The horizontal method on the other hand includes the usage of two sheet laid one above the other. The advantage of using the horizontal method is that there is a need for just one seam joint and few butt joints. Drywall scrap pieces should be placed along the wall in order to set the first drywall row. Once the first row is set properly, the scrap pieces should be removed; it leaves behind a space for laying carpet. Few nails should be tapped into the drywall at the top at first. It gives some stability and the task of laying nails further, becomes easy. The nails need to be fixed at a distance of 8 inches from each other. The second row should be placed above the first and nails fixed in a similar manner.

Procedure to Hang Drywall on Ceiling
The procedure to hang drywall on ceiling is easy to follow, even if the positioning is a bit awkward. A drywall jack would prove to be of great help to perform this task. Raising the drywall with this cable jack would ease the job. The markings should be done appropriately and cuttings for light fixtures need to be made. Next step in the process is to mount the drywall on the jack and position it in the correct location. The nails should then be fixed in such a manner that ½ inches of border space is left. It prevents the edges from breaking.

Procedure to Hang Drywall Around Windows
The following information or rather tips would help in easing the process of installing drywalls around windows.

• The drywalls to be used around windows need to be thin i.e. about ¼ inches in thickness.
• One should use screws instead of nails for the installation of drywalls. It helps prevent chipping, cracking and splitting.
• The window frames have to be removed completely before the installation of drywall around windows.
• It is advised to get somebody for help while installing drywalls around windows. The drywalls being heavy, one would find it awkward and tedious to do the nailing all by himself. Read more on Drywall Installation Tips and Techniques.

The content presented in the article above, gives an idea about how to hang drywall on ceiling and walls. The procedure to hang drywall in basement is somewhat similar to the above mentioned procedures of ceiling and walls. The above information would help in easing out the task of hanging drywall.