How to Cut Crown Molding

Giving an artistic look to the walls, cabinets and pilasters with crown molding has always been in fashion. The moldings are made with eye-catching designs that they gracefully flare, and impart a beautiful look to the area that has been cut or made. Crown moldings are generally made use of at the areas where the ceiling meet the walls. The top and bottom of the molding is cut at 45-degrees. This allows the molding to lay itself flat against the wall and ceiling to make a right angled triangle. At the corners of the wall, two pieces of crown must be joined with a miter joint. It is done by cutting the ends of all the pieces of the crown molding that require to be joined. By keeping such small things under consideration, you can give an entirely new and trendy look to your home or places for storage.

What are the Materials Required to Cut Crown Moldings
The materials that you will require to cut crown moldings are - compound miter saw, scrap wood, crown molding and safety equipment like eye wear and hand gloves. There are two methods of cutting crown moldings. Both of them are equally popular. The choice depends upon the comfort and ease of the person working on crown moldings. The first method is called 'upside-down and backwards'. It involves propping the crown molding up against the fence and setting the compound miter saw angle. The second method of cutting crown molding involves laying the crown molding flat and facing upwards.

You need to select a fine miter saw to cut crown molding. The selection of a miter saw carries great importance. Correct selection of the miter saw can make the task of cutting crown molding much easier and faster. If the crown molding that you are using is 5 inch wide, use a 10 inch saw. If the width of crown molding is 6 inches, go for a 12 inch saw. Similarly, if you are making use of crown moldings which are 10 inch wide, use a 12 inch sliding compound miter to cut them.

How to Cut Crown Molding
Place all the crown moldings in the room where you wish to install them. Allow the crown moldings to stay in the room for about a day. This will help them adjust to the temperature of that room. This is a very important step that needs to be done before actually cutting the crown moldings. This is because, it will allow you cut the crown moldings with fineness, and in correct angles. This will further help you fit the cut crown moldings appropriately into the wall, cabinets or wherever you want to.

Once everything is set, you can begin with cutting the crown molding. To start and get yourself accustomed to it, take a small piece of crown molding and cut it the way you can give it the desired shape at the top and bottom. Cut crown molding with a compound miter saw or something that you find suitable for the purpose. Cut crown molding corners and cut crown molding inside corners. Cut from all those sides which can give you the desired shape and size. This step will give you a clear idea how you should cut and what shape you should give to the crown molding to make it suitable enough to meet your purpose. When you are sure of the method, shape and size, work upon all the pieces of crown molding separately. Follow all the instructions and tips given here in this article well to get good results.

The method described in this article is the best way to cut crown molding. In fact, it is known to be the most simple and easiest way to cut crown molding angles. You will find that this particular work requires prudent consideration and attitude for perfection at every step. If you don't fulfill both the requirements, you may not be able to give an attractive or finished look to your house. Well, whether you love cutting crown molding or not, you cannot deny the fact that nothing is comparable to the satisfaction that you get by doing something for your home all by yourself. So, keep learning these arts and skills to make your home a more lavish place to live in.