How to Clear Cloudy Pool Water
For almost all pool owners, cloudiness of water and chemical imbalance are common problems. Follow correct tips on how to clear cloudy pool water and maintain a sparkling blue water.

What Causes Cloudy Pool Water?
As pools are open water structures, they are exposed to environmental dust, dirt, pollens, etc. just like a pond or other stagnant water bodies. And the result is quite predictable, dirty water, cloudy water or colored water. Prior to implementing the methods concerning how to fix cloudy pool water, figure out the causes for the problem. In most of the cases, the water becomes cloudy due to increased amount of suspended particles, chemical imbalance, filter malfunction, pump defect and reduced chlorine level in the pool water.
How to Clear Cloudy Pool Water Fast?
So, you put chlorine, bromine and follow swimming pool cleaning tips, but the water still appears dull. It is quite likely that the chemical balance of the pool water is disturbed. In fact, maintaining clear swimming pool water is easier said than done. But, with correct swimming pool maintenance tips and simple remedial measures, you can definitely maintain sparking blue water. Following are some ways on how to get rid of cloudy pool water:
- The first step towards cloudy pool water treatment is to rule out the probable reasons for cloudiness of water. If you have left the pool unused for a long time, there is no doubt that environmental pollutants are the prime causes. Also, recall when did you last check your pool water filter and pump.
- For confirmation, you need to check the chemical balance of the pool water, especially chlorine level (ideally 1-3 ppm), water pH (preferably 7.2-7.6) and calcium hardness (ideal is 200-350 ppm). Low chlorine, high pH and increased calcium level may be the reason.
- The actual steps on how to clear cloudy pool water starts with identification of the causal factors. Adjust the chemicals and try to balance according to your findings. Remember to run the filter system to remove suspended particles.
- Regularly check the chemical levels and do the needful for 2-3 consecutive days, until the results are optimal. If the chemical levels are balanced and you still notice cloudiness, the problem is with the fine suspended impurities.
- Clean the filter system and check if it is working fine for solving this swimming pool problem. If the filter system is not effective enough to separate out fine debris completely, consider backwash by following the manufacturer guidelines.
- By now, you have tried the possible cloudy pool water remedy from your side. In case, the water conditions remain the same, try using a commercial pool water clarifier and flocculent. Strictly follow the dosage and usage guidelines mentioned in the product leaflet.
- Last but not the least, do not forget to clean the sides and bottom of the pool. A dirty bottom or unclean sides contribute to cloudiness of pool water. Clean with a pool brush and finish with vacuuming.
Like This Article?
Follow:

Post Comment


