How To Choose a Bar Code Scanner?

Bar code scanners are used to read the bar codes found on products in a wide variety of situations. Most of us are familiar with bar codes found on packages at the grocery store. When you purchase an item, the bar code on the package is scanned by a bar code scanner. This automatically calls up the item particulars such as the item name and unit cost. The cost is then calculated automatically and added to your bill.

When you buy a product such as a can of soup or a box of cereal, it alerts the stock control system to the fact that the item was purchased. This allows the control system to maintain a current record of how many of each item is still available for purchase. As long as the entire inventory was entered correctly in the first place, this allows your inventory control to be automatic and constantly up to date.

The first step towards installing a stock control system is to install the software that is going to keep track of information about your inventory. You will use bar code scanners in order to get the information about your inventory into the system. Each time you scan an item it changes its count in the database.

A system like this one can generate different bar codes for items that need them. The software will create a one of a kind bar code for each new item. The bar code printer will then print the code label which is then placed on the item.

These are the top three kinds of bar code scanners that are used today:

1. Wand Scanners - The least expensive type of bar code scanner is the wand system. And even though it is less expensive, it still is a great choice for most uses. Typically wand prices are a tenth of laser gun prices and about a fifth of CCD scanner prices.

The wand system works very well most of the time, and is is the cheapest kind of bar code scanner. As far as cost is concerned, one of these wands will cost 1/10th as much as a laser gun, and about 1/5th as much as a CCD scanner.

However, wand scanners are limited in their appplication. To succeed in obtaining a proper reading, the wand has to be positioned correctly with respect to the bar coding label. It is necessary as well to slide the wand along the label neither overly rapidly nor overly slowly. Wand scanners are limited by their resolution requirements too. If a bar code's resolution is too fine, then the wand won't be successful in scanning it properly. For instance, a 5 mil bar code cannot be read by a 10 mil device. You must remember that when you go out to buy a wand scanner.

2. The CCD Scanner - CCD (charged coupled device) technology is the next least expensive bar code scanning system. Like the wand scanner, CCD readers must be in direct contact with the bar code label in order to read it. But unlike the wand, there is no need to move the device across the label. The operator simply presses the reader against the label and pulls the trigger. The bar code is then photographed, digitized and decoded by the system.

Of all the different types of bar code scanners, CCD readers are considered the most straight-forward to use. They are manufactured in widths that start at about 2 and go up to 4 inches. A CCD reader is expensive compared to a wand (about four times the cost), but is a bargain compared to the laser scanner (about one third the cost).

A promising new technology similar to CCD is called FFO (Fixed Focus Optics). These scanners are non-contact readers, which means they can read bar codes from as much as 20" away. They will also be able to read two-dimensional bar codes as they become more popular.

3. The Laser Scanner - Laser scanners use a beam of light to rapidly scan across the bar code label. This means the scanner itself remains stationary, and there is no need for direct contact with the bar code label. Scanning is automatic in the sense that the scanning action is initiated when an object is held in front of it.

This system is widely used in many different types of installations. Scanning is such a quick process that it ss even possible to insert laser scanners directly into conveyor systems. As objects move along the conveyor, they are automatically scanned and recorded. You see this in grocery stores, where the cashier simply moves the items over the scanner to scan them. This type of system is quick enough to keep up with even the fastest motion of a cashier, and it is quicker and far more accurate than any other alternative system that could be used.

Regardless of which scanning system is best for your business right now, be sure to purchase stock control software that lets you implement other scanning technologies as the need arises.