How to Change Wiper Blades

Knowing how to change wiper blades can only be mastered with practice and supervision. The wiper blades replacement kit that is available in the market has a load of instructions and clips that seemingly do not fit anywhere, but with some careful study and an able guide, you can easily achieve this target. The wiper blades of a vehicle are very important car parts as they maintain clear visibility on a rainy day. Even at times when there is a lot of dust settled on your windshield it is your wiper blades that clears the dust out, so that, you can see things clearly.

All these factors make it very important for a person to know how to change wiper blades, as we all know that the safety of the people in the vehicle along with the safety of the people around are the 2 most important things. Defective or broken wiper blades can be a major hindrance to visibility and can lead to some terrible car crashes.

How to Replace Wiper Blades
It is important to remember to carry out windshield wiper replacement in warm and sunny weather. Performing this task in the rain can be a major hassle, though unfortunately this is the time that everyone actually remembers that their wiper blades need replacing. When the wiper blades or the windshield is wet, replacing them becomes quite hard. Otherwise, it is a fairly simple task to do so. Follow these instructions on how to change wiper blades.

1. First you need to remove the old wipers, but be careful while doing so because the wiper arms may cut your fingers or scratch the glass.
2. Prop up the wiper arms and make them stand in the upright position.
3. There will be a small compressible tab on the underside of the arm where it meets the wiper. Press this.
4. Now slide the wiper blade off smoothly.
5. Without the soft wiper blade, the metallic wiper arm can snap back into the windshield and damage the glass. In order to avoid this, rest the arm back in its original position slowly.
6. Now comes the tricky bit of attaching the wiper blade on to the arm. The wiper arm will have a hook on one side, and this needs to click and fall into place on the wiper blade.
7. The wiper arm goes between the opening on the blade and the hook must find the right spot to get attached, and once that is done you will hear a clicking noise.
8. This is the trickiest part of how to change wiper blades and once you figure it out you will never forget how to do it.
9. For a beginner, this can be a slightly daunting task as it becomes slightly difficult to locate the part on the wiper blade where the hook goes.
10. Once you have figured it out, carry out the task for the wiper blade on the other side and then check if your wipers are moving smoothly and functioning properly.

If you are in doubt, because this is the first time that you are attempting to carry out wiper blades replacement, have someone who knows how to do it, show you. This is the easiest way to learn how to change wiper blades, and henceforth you can easily carry out the procedure yourself.

It is important to purchase the right kind of replacement wiper blades for your vehicle, as the wrong kind would just not fit and function properly. When you are purchasing these blades take your car to the store and ask them to give you the ideal wiper blades for your particular vehicle. If you are further in doubt, they can tell you how to change wiper blades as well. Remember, whenever in doubt, do not hesitate to ask.