How to Build an Outdoor Shower

An outdoor shower enclosure is always an attractive addition in your backyard. Building an outdoor shower should be in accordance with the available space in your backyard. The following lines will provide information on how to build an outdoor shower.
How to Build an Outdoor Shower
An outdoor shower can come in handy for the entire family, especially when they come back from a swim in their backyard. The presence of a shower enclosure ensures that you can freshen up outside before stepping back into your home. At times, when your home is filled with guests and the bathrooms are occupied, an outdoor shower proves to be very handy. Although the type of shower enclosure is a matter of choice, wooden shower enclosures look neat and are cost effective. Before you start building a shower enclosure, make sure you mark the dimensions of the enclosure on a piece of paper. This will be helpful while constructing your outdoor shower.

Concrete Pad
After you decide the location for the outdoor shower enclosure, mark the area where the concrete pad, which forms the basis of the shower floor needs to be laid. Depending upon the width of the shower enclosure, use a concrete mix cement to lay the floor of the shower. When you lay the cement make sure you smoothen the surface with a trowel, so as to ensure that it is does not have any loose ends and bumps. Use flat river rock as tiles over the concrete pad.

Proper Flooring
When you take a shower, it is of utmost importance to see to it that the water used needs to pass through a hole used for drainage. While building the floor for the shower enclosure, you've got to ensure that the water does not stagnate in a particular area. It is a requisite for any outdoor shower to have a floor that is slightly sloping to ensure that the water does not accumulate anywhere.

Setting up the Pipes
The post that you set up in the ground needs to be eight to ten feet tall. Get the help of a plumber to install the PVC pipes through the posts. Get the plumber to drill a hole for a stop lever in the pipe. Once that's done, attach a shower head to the top end of the PVC pipe to ensure free flow of water.

Building the Exteriors
To build the enclosure for the outdoor shower, dig up the ground in accordance with the width of the area. Use waterproof wooden planks, and set them erect in a rectangular or oval fashion in accordance with your design. Although most outdoor showers prefer to be without a roof, you can opt to have a thatched roof that would go well with the outdoors. You can use latches that match the woodwork of the enclosure for the door.

Interiors of the Enclosure
If there is ample space in your enclosure, you can make a seating area with rough granite. A compact mirror hanging in an area away from the shower head is a great option. You can go ahead and add lights with a dim glow which will be helpful especially at night. Often, people ignore towel racks and leave towels hanging on the latches of doors. Although it suits the purpose, it a good idea to install towel racks. You can also have a compartment to keep your toiletries which will ensure that you wouldn't need to make frequent trips to other areas in order to get them.

Once you've completed the process of building your outdoor shower, take a moment and marvel your accomplishment. The efforts you put in building your outdoor shower will make you sweat, so get in there and take a long shower and freshen up!

By Parun Pereira
Published: 5/21/2009
 
Use the feedback form below to submit your comments.
Your Comments:
Your Name:
Use the form below to email this article to your friends.
Recipient Email Address:
 Separate multiple email addresses by ;
Your Name:
Your Email Address: