How to Build a Fire Pit with Rocks
Fire pits are very convenient and comfortable for the winters. Find how to build a fire pit with rocks from the steps mentioned in the coming up article.

Building a Fire Pit with Rocks
It is always a better option to build a fire pit on your own, as the process is easy and you won't have to burn a hole in your pocket with major expenses. Outdoor fire pits can be built with a number of material like stone, tiles, wood, concrete and rocks, which are strong and durable. But out of all these raw materials using rocks to build a fire pit in your backyard can be the best option, since they are basic, stylish and can last almost a lifetime. There are many ways of building a fire pit, but we will find out a very basic method of how to build a fire pit with rocks. These simple steps are put together in the coming up paragraphs just for you. Take a look!
Materials Required
- Rocks or stones
- Flour or chalk
- Gravel
- Sand
- Shovel
- To start with learning how to build a fire pit with rocks, you will first have to choose a particular area in the backyard. Measure it with a measuring tape and make sure you take about an area of 2 to 3 feet, as building a fire pit needs space. Then with the help of flour or chalk, mark this area like an outline so that you build the pit accordingly. Don't erase this marking till you have finished digging these outdoor fire pit ideas.
- Now, with the help of the shovel, dig out a neat hole in the measured area, which will accommodate the fire pit. If you are building a fire pit for the first time, I would suggest you go for a square shaped fire pit design, as a round one will require more work and accuracy. Thus, while digging, make the sides of the fire pit vertical and then dig into the ground at a depth of 7 to 9 inches.
- With the shovel clean the bottom of the ditch by scraping out the surface and leveling the ground uniformly. Once you have done this, add a 3 inch layer of gravel to the bottom of the pit for drainage reasons. Since this is the main foundation of your rock fire pit, you will need to make it strong and effective.
- Over this layer of gravel, add another 3 inches layer of sand and level it till it is hard and thick. You will require enough sand to make a layer this thick because the volume of sand can be lesser than gravel. With the shovel, make this layer even so that it forms a seal over the ground level. This sand layer makes sure that the sparks from the fire pit do not enter the ground and damage the foundation. These steps are common to all fire pit plans and can be used to learn how to build a fire pit with bricks.
- The last step of making a rock fire pit is to build the upper section of the pit with rocks or stones. Now, that you have the edges of the fire pit, place the rocks around this surface and cement them one over the other to create the wall. This covering to the fire pit will keep the flames inside and protect the surrounding from them. To make these patio designs with fire pit, you can make the wall a bout 3 feet above the ground level so that you can see the fire and the surroundings are protected too. You can follow these steps if you want to learn how to build a gas fire pit as well.
Like This Article?
Follow:

Post Comment


