Hot Air Plastic Welding Equipments

Plastic welding is a process of joining together two or more pieces of plastic, by means of heat. Different methods for welding plastic are hot air plastic welding, speed tip welding, extrusion welding, contact welding, hot plate welding, high frequency welding, ultrasonic welding, laser welding, etc. Welding performed by hot air plastic welding equipments is strong and of excellent quality. After the process of welding, a weld of 20 mm to 50 mm is produced. Different plastic welding machines are present to weld plastic.

Equipments for Welding Plastic

DSH-BX hot air gun: The welding temperature can be adjusted electronically. The precision of temperature control is high, so it is suitable for high temperature and for long-run utilization. Along with plastic welding, it also performs thermal plastic molding and docking operations. The welding done by these plastic welding tools is leak-proof and accurate. The DSH-BX has large impeller blades for increasing air flow through the heating element. The gun consists of five segmented ceramic disk insulators, which allow expansion during heating and compression during cooling.

DSH-D hot air gun: Its temperature control precision is high and it can work continuously for 24 hours. It can reach up to a temperature of 1500 degrees Fahrenheit. The gun is equipped with heat-proofing technique to protect the covering. This welding equipment consists of a motor of superior quality which employs high temperature bearing and heat reducing alloy carrier, that helps in keeping the motor components cool. The machine consists of spindles which results in smooth operation. It is encapsulated with a segmented ceramic insulator, which allows expansion and contraction during heating and cooling, respectively. It consists of impeller blades which help to increase the flow resulting in increased speed.

DSH-E hot air gun: The welding temperature can be adjusted according to the quality of the material to be welded. Welding rods, having different specifications, are also used in the process of welding. This plastic welding equipment is safe as well as reliable. It can be used for different purposes like plastic molding and docking operations.

DSH-X hot air gun: This gun is used worldwide. Its safe and reliable property has made it popular. This plastic welding tool has been provided with double insulation, thus enhancing the protection of the user. It can be used for welding any kind of plastic.

DSH-91 hot air gun: A knob for adjusting the temperature is an integral part of this gun. This knob makes it an ideal tool for heating material of different quality. The heating temperature of this plastic welding equipment ranges from 40 to 650 degrees. The rated voltage is 220 volts, maximum power is 700 watt while the frequency is 50 hertz.

Volcano hot air gun: The heating temperature provided is 40 to 700 degrees. A welding torch is used for the process. This plastic welding tool is easy and flexible to operate. The gun requires a voltage of 220 volts, while a frequency of 50 hertz.

Standard End Nozzle for hot air plastic welding gun: It is mostly favored for vinyl floor welding, car bumper repair, plastic fabrication and welding. This hot air plastic welding equipment is engraved with nozzles which adds strength to the gun.

A welding equipment requires high level of precision. Therefore, a welder should be aware of the welding tips and techniques, while using the gun. The hot air plastic welding equipments mentioned above are highly efficient in welding plastic pieces efficiently.