Homemade Wind Generator - Instructions on How to Build a Wind Powered Generator

As far as global energy crisis is concerned, the most effective solution is to use renewable energy whenever possible, rather than using fossil fuels. Such energy sources also help in combating the emission of greenhouse gases. In recent times, global awareness programs are being taken up, which include the implementation of scientific techniques for harvesting a renewable energy. Equipments that focuses on the use of solar energy and wind energy are harnessed as a major step towards the sustainable use of energy.

You can invest in homemade wind generators for obtaining clean energy and reducing carbon footprints. Installing a wind generator may cost a hefty amount of about $4000. A cost effective alternative to this is home built wind generator power. Let's take a look at the instructions on how to build a wind powered generator.

Instructions to Build a Wind Powered Generator

If you have mechanical basics, then you can easily build your own DIY wind generator without any major hurdles. Prior to building a homemade wind generator, you can do a thorough research about the parts and the working of a wind generator. Doing so will help you in getting a glimpse about the basic requirements for effective functioning of a wind generator.

Required Materials: Selecting the appropriate and superior quality materials is very important to build a wind generator. You can check for the companies that supply the complete kit for constructing a homemade wind generator. Some of the basic requirements include generator, batteries, blade hub, rotor (blades), tower (body), mounting, tail, wire and screws. Tools required for the construction are electrical pliers, saws and wrenches.

Build Wind Generator Blades: Blades for homemade wind generator can be made up of PVC pipe, carbon fiber or other materials. If you are planning to build blades on your own, you can consider using wood, stainless steel and/or ABS (acrylonitrile-butadiene-styrene) pipes. The exact shape and size of the blade may vary depending upon the power generation, motor type and the expected velocity of wind in the area.

Wind Generator Hub, Body and Tail: While speaking about the hub for the blades, you can purchase an appropriate size hub from the hardware store. Ensure that the motor fits in the hub properly. A steel tubing is an ideal option to serve as the body of the homemade wind generator. Regarding the wind generator tails, you can make the use of recycled materials.

Wind Generator Tower: Purchasing readymade wind generator towers can be quite costly (more than $1000). Poles that are used for TV towers lines can be used as a wind generator tower. You can purchase used TV tower of appropriate length from the local supplier.

Assembling the Wind Generator Parts: Once you are ready with all the parts of homemade wind generator, assembling them is easy. Fit the motor in the hub and fasten the blades. You can use protractor to maintain the angle of the blades at 45 degrees. For charging electricity, connect the wind generator with the batteries by using a correct size wiring system. With this, you have completed building a homemade wind generator.

Decide the location of the homemade wind generator and erect the tower. For proper orientation of the wind turbine, you can take help from the local weather forecast. Make sure the height of the unit is at least 30 feet higher than any other obstructing structures, at least within 400 feet diameter of the tower. After installing the home built wind generator power, check whether it is working or not. You can use the electric energy stored in the batteries for using electrical appliances like TV, pumps and AC.