Tips for Hanging a Drywall
Hanging a drywall is an easy task to do all by yourself as long as you have helping hands to help you pick up the heavy sheets to fix them on the ceilings or walls. To execute such a task, one needs to have a proper guidance to go about hanging it, so keep reading for some tips.
In the mid 19th century when people would work on a home improvement project like building walls and ceiling using building materials like plaster of Paris or lathers, etc, the amount of time those materials would take in getting firm and rigid was intense. But in the present times, the invention of drywall, which has gypsum and Sheetrock materials present in it, has actually made a man's work much easier. Today, suspending a drywall takes fraction of the time, which in turn, gives you more time and energy to focus on aspects like painting and pasting wallpapers for aesthetic effect.
What is a Drywall
Drywall, a.k.a Sheetrock, plasterboard, wallboard, etc., is made up of gypsum plaster sheaths. They are large sheaths which are sheathed in a single paper line pattern. The usage of drywall is massive, it's used in industrial applications, housing industries, home constructions, refurbishment of interior walls and projects as such. Installing a drywall needs proper techniques, appropriate tools, good support of helping hands delivering physical strength and the right amount of time and interest to execute the task. It is known to be a great way to cover electrical blemishes, studs, piping, wall cracks, etc., present on the walls. The standard thickness that drywall sheets are available in are 3/8'', 5/8'' and ½'' size. So keeping all these characters in the picture, hanging a drywall on ceiling or on a wall shouldn't be a hassle at all. Explained below is the basic procedure for hanging drywall, so read it all.
Best Way to Hang a Drywall
If you properly follow these tips, you will definitely reduce your time on taping, sanding and mucking the walls after the task is complete.
Materials Needed
- T-square
- Stiff-bladed Keyhole Saw
- Utility Knife
- Rasp-N-Knife
Always Hang from Top to Bottom
This is the first step in the procedure and essentially the most important one. Herein, you will have to mark the studs just before you lift the sheet for installation. Place the drywall right below the installation area and take a crayon or a carpenter's pencil to mark every location of the stud which will be 7'' from top to bottom.
Cut the Extras
Generally, sheets are available in full-sized lengths, thus, if you do not wish to make use of the entire chunk, measure the size you want the sheet to be and cut it to suit yourself. Keep your hand on top of the sheet and away from the cutting blade of the T-square. Use your foot to keep it in place, just in case it doesn't move. Make the cut neatly at the center and pull one of the sides towards you. Later on grab hold of a utility knife and cut out the paper on the back of the sheet to ensure a clean edge.
Lift the Sheet
Hold the sheet in whichever hand you are comfortable with and use that hand to place the sheet stable on the wall or ceiling. Use the other hand to hold the screwdriver for punching some screws in. This can be an awkward position to work in, so it's best that you find a helping hand which will make your work much easier.
Drill the Screws Into the Sheet
Always start working from the center of the sheet. Secure some screws at the bottom center first and then begin to move out along the lower bottom edge. For every specific thickness of the sheet, there are specific fasteners available to match the size. Use them as the project demands and carefully secure all the screws on the sheet into the wall, wood or wherever you are installing it.
You must have seen that hanging a drywall isn't a real deal at all. It just takes a whole lot of strength and skill to get any home improvement work done properly.
Like This Article?
Follow:
Post Comment