Garage Door Installation Guide

Garage door installation may appear to be a challenging task. Yes, it might just prove to be so, but not for those who have some basic carpentry skills and are handy with tools. Choose a comfortable time for installing a garage door. It will be excellent if you read a garage door installation guide beforehand, which usually comes along with the garage door kit. The procedure is generally simple to perform. However, it may differ slightly for different types of garage doors. Some basic steps on how to install a garage door are described here.

Garage Door Installation Instructions

• Seal the bottom of the first panel with a weather stripping.
• Secure the doors in position by inserting nails into the verticals at an angle, with the help of a hammer.
• Bring together the hinges to the upper portion of the door.
• Join the vertical, horizontal and curved tracks together by following the instructions written in the garage door installation manual.
• Add brackets and rollers to the door of the garage.
• Place vertical tracks on the rollers of each doorway.
• Connect the hinges of all the three sections. You can use power drills and a screwdriver.
• When the door is level and the track is clean, place the upper discs of the vertical tracks to the wall.
• Attach the vertical brackets to the tracks, framing each part with lag screws.
• Join the vertical and curved tracks together.
• When the vertical track is level, cut the hanger on the rear for proper fitting.
• First, affix the track to something strong and permanent, and then fasten the track to the hanger. Perform this step for the second horizontal track as well.
• Place the garage door on its permanent location.
• Clean away any debris or leftover nails to ready the area.
• Verify the alignment of the door track.
• Make all the needed adjustments by securing tighteners.
• Make sure that the safety shut off features of the garage door are working well and they should be able to pull the door back if something blocks its path.

See more on Garage Door Opener Installation. In case you are replacing an old garage door with a new one, then refer to the garage door installation manual. A garage door installation guide also includes information on the removal of a garage door. Be careful while working with the tension spring. The tension spring is under huge pressure and might cause serious injuries.

Tips on Garage Door Opener Repair and Maintenance

Once installed, a garage door does not need frequent maintenance. However, with continuous use and vibration, the garage door may not open and close properly. Most of the times, such problems can be repaired on your own. Some tips on garage door opener maintenance and repair are as follows.

• If you find that the fasteners and brackets of the garage door are loose, tighten them up with the help of a wrench or a socket. Ensure that all the hinges of the garage door are intact.
• Keep a check on the bolts and nuts. In case a few are missing, replace them. This will help in keeping the garage door working well for long.
• You should be able to spin the stem of the roller with the help of your fingers by applying a little force. If the rollers are frozen on the hinge, apply a couple of drops of three-in-one oil. In case the rollers are too worn-out, replace them.
• If you find any bends in the track, correct them using a pair of vice grips.

Read Garage Door Repair Do-It-Yourself for detailed information. Referring to a garage door installation guide will help you to a great extent in installing a garage door on your own. Doing something for your own home is always satisfying and comforting. So why not spend some time experiencing this wonderful feeling that you can cherish forever!