How Does an Electric Furnace Work

Initially sources of heat such as wooden fires and small-sized furnaces fueled with waste wood were used for a very long time. These furnaces were later replaced by one's that functioned by burning coal and other fossil fuels. Then the energy crisis and environmental issues resulted into the development of gas furnaces. The gas furnaces are now being replaced by electric furnaces. The functioning process of electric furnaces is totally different from that of furnaces that consumed fossil fuels. The electric furnace is also known as a domestic furnace. This furnace is totally different from the industrial furnace and must not be mistaken with the furnace used to melt metals.

How Does an Electric Furnace Work

The basic function of an electric furnace is to maintain a higher temperature in the house or any building. As compared to furnaces that consume fossil fuels, electric furnaces are economical to operate due to their unique functioning process. The operation of any furnace depends upon the thermostat. The thermostat is a simple unit that acts like a thermometer. Just as the air conditioner is set to a particular temperature, the thermostat is also set at a given temperature. If the temperature of the house falls below the set temperature on the thermostat, then the house starts to become colder. The drop in temperature is sensed by the thermostat. The thermostat thus alerts the electric furnace that is usually situated in the basement of a building. The most important component of the conventional electric furnace is the heating coil. This coil turns extremely hot when electric current is passed through it. The heated coil in turn heats the temperature of the air around it. The heated air around the coil is then routinely blown into the house through a blower. The pressure that is exerted by the blower on the heated air, warms it further. This air is blown into the house and the uncomfortably low temperature rises to a very pleasing level, rekindling the spirits of the people in the house. The cold air that was initially in the house replaces the hot air in the electric furnace. This air is in turn heated by the heating coil of the furnace and is blown back into the house. To maintain a supply of fresh air in the house, some furnaces also suck air from the atmosphere outside. This air however is very cold and heating it drastically increases the energy consumption of the furnace. After the air in the house reaches a particular temperature, the thermostat automatically shuts off the electric furnace.

Advantages of Electric Furnaces

An electric furnace is one of the most modern home appliances that has been invented, by taking into consideration many issues, such as energy crisis and pollution. The old furnaces operated with the help of fossil fuels, created a lot of pollution by releasing many carbon compounds and gases. They also drastically increased the particulate pollutants in the air. On the other hand, the electric furnace does not pollute the environment as it does not burn any fuel. The electricity consumption of the electric furnaces can also be controlled with the help of the thermostat. Modern electronics have also enabled the development of electric furnaces with low energy consumption.

The use of electric furnaces is slowly being accepted universally and has boosted the effort in energy savings and prevention of global warming.