Dual Pane Window Repair

A crack in the glass, a deflected sun ray and a shattered you as well! That is perhaps the story behind you wanting to get your dual pane window back on track. Now, repairing a window is not actually a cake walk. I mean of course it also depends on the type and gravity of damage. But there too, repairing a window with single pane is easier as compared to dual pane. The reasons notwithstanding, dual pane window can turn out to be quite a job. However, if you are interested in taking the plunge, well, here is more on dual pane window repair.

Dual Pane Window Replacement

One of the most important things to remember here is that glass in double pane windows goes twice as deeper than single pan windows as these are meant to be energy efficient. Normally aluminum and vinyl frames are used for double pane windows. For repairing a dual pane window you would need caulking machine, putty, screw driver and if the need be drilling machine and a compact vacuum cleaner. Here is the procedure, considering that you have a replacement window to fix!

# 1
The good news is that, although single pane and dual pane windows are different and there is a slight bit of differentiation in the way they are fitted, the repairing process is almost the same. So we start off with removing the old glass panes for broken window repair.

# 2
Even before you start off with the installation, it is necessary to clean the panes thoroughly, with the help of someone else, if required. Dust them or if the dust and dirt is too fine, use a vacuum cleaner. In case you find bits and pieces of glass, get rid of them too during the process of dual pane window glass repair.

# 3
Now, taking it ahead from the earlier point, after you are done with that, you will have to remove the window panel or unit by unscrewing the hinges. Then in double pane widow repair or even otherwise applying some amount of caulking is necessary, be it a vinyl frame or an aluminum frame. The catch is that caulking has to be done very evenly and properly for ensuring that there are no air gaps.

# 4
The new units have to be placed and fitted completely in the frames which have been put up by you or already there. This is very important so that no problems arise regarding the repair work and the fitting.

# 5
Well, you are more than half done here in double pane window replacement and repair. Now all you have to do is to fix the replacement windows by screwing the units you have placed after checking that they are placed correctly. Check the pre-drilled holes. See if the hinges are working properly and the panes are swinging properly sans any glitch by opening, closing and locking the unit.

# 6
Okay, we have made sure that the windows are working fine. It is time now for the frames. Place the screws carefully in the pre-drilled holes and then press the frame properly and securely into place. Apply caulking in case you see some gaps or spaces.

At the end, check and ensure if the glass is thick enough to fit properly in the frame or frames. There is a risk of the glass breaking down even at the slightest of force applied and windows are banged. That's it, you are done with dual pane window repair!

I am sure this is going to save you some hard-earned money, rather than getting it done by a professional! As far as dual pane window replacement cost is concerned, it can be anything between $200 to $700 for intact window frames. If the frames are bad and have to be fixed again, then the cost will rise drastically. But it can go as high as $1000 for a single window. It also depends on the size of the house and the number of windows. Last but not the least, the cost may go up to $20000, for those filled with argon gas. That's it! I sign off here! All the best!