Direct TV Remote Control Programming

What is Direct TV Remote Control Programming?

It is surely annoying to have many different remote controls to function all the various devices in your complete entertainment system. You need to have different remote controls for the DVD player, VCR, television, and other entertainment devices. Direct TV remote control programming is a method which enables you to use the same remote control to operate all types of electronic devices in the entertainment system, such as the satellite TV, DVD player, and the receiver. However, for this functionality to be utilized, the Direct TV remote control has to be programmed in a certain manner with direct TV remote codes. And with several home entertainment device alternatives, comes a substantial amount of codes.

Every consumer electronics manufacturing company carries out the pre-programing of their devices with special codes. Such kind of programing is done to preclude the contradiction of signals with the devices of other manufacturers. As a result, numerous remote control codes have been made to associate and maintain a link with the many pre-programmed equipment used. As the technology keeps changing and several electronic equipments are introduced, so also many new codes are developed.

Tips on Direct TV Remote Control Programming

If you see the Direct TV remote control, you will find that there are many buttons whose functions are difficult to grasp. The typical ones are the slide switch having four positions for easy component selection, code library for video and stereo components, code search to enable program control, and memory protection to make sure that the user would not need to re-program the remote when he changes the batteries.

To start off with the Direct TV remote control programming, you are required to choose the equipment which is needed for programming. Generally, a majority of the remote controls have separate buttons which correspond to different equipments. 'SAT' operates the satellite receiver, 'TV' controls the television, 'VCR' controls the Video cassette recorder, and 'Aux' operates one of the various additional devices like the home stereo system. You are required to press the button of the equipment to program until the corresponding light on the remote control flashes.

After you have decided on the device that is needed for programming, you would have to determine the appropriate code for that particular device. Codes for a majority of companies and makes can be found at the back of the remote control's manual.

The next step would be to enter the code number on the remote control's keypad, a number which is listed first for the particular equipment. After doing so, press the appropriate key to indicate that the input has been completed. In case of some remote controls, this may be the asterisk (*), while for others it may be the pound key (#). If the code entered is proper, the mode light on the remote will flash, after which the respective device is ready to be controlled. The user needs to test the operation by turning the power off and on. If this works fine, the device is programmed.

Remote controls come with various codes for different device brands. So if one code does not work, try to use the next one. Use different codes until the correct one is found and the device is programmed. In this manner, the task of direct TV remote control programming can be easily executed. And then you can sit back and control all the gadgets with that one master remote control.