Different Bracket Types Used in Homes

When you're looking for decorative architectural brackets, you'll notice that it can be made from a variety of materials including composites, concrete, foam, etc. These brackets were once used as structural supports; yet, times have changed and it's not uncommon to find these things used for decorative purposes instead.

A Look At Different Brackets

The commercial industry uses foam brackets as a way to accentuate a home's look and it's quite affordable.

Wood, on the other hand, is often used because it's able to give structure and doesn't have to be painted. The unpainted look is often a reminder of nature. During the craftsman era, wood brackets were widely used and have recently made a comeback because more home buyers are looking more into architectural details.

PVC brackets offer home buyers another option to wood but still get the painted wood look with the foam durability. PVC brackets can be manipulated to be custom brackets mainly because they're not designed out of similar molding techniques like foam.

You'll often see architectural brackets in craftsman type homes and with new no rot materials hitting the market, the brackets are being used to accentuate the home. This type of architecture highlights many details, which gives it some unique style.

With the current housing recession, builders are turning to using architectural brackets along with other architectural appeals so that homes look better and will bring in more home buyers.

When you're looking for custom sizing often times handymen will use cedar wood brackets. The majority of handymen will work on materials right on site. However, using custom mill works company is quite common.

Cedar wood isn't difficult to work with and is simply fabricated to deal with any architectural need. They can be left natural, be painted or be stained. If you go with the stained look, you'll notice that there can be no other style that will give you that look.

How To Install Wood Brackets To Give The Structure Some Support

It's not hard to install the wood brackets; however, there are some things you need to know before you undertake the project. You need to be sure that the brackets are anchored to the house where it is load bearing. Lag blots can help you with this situation.

To start, drill a large two-inch diameter hole and make sure it's got a three-quarter inch pilot hole for your lag bolt. Make sure this is done in the wood bracket at specific point and that the wood plug is cut so that it hides the lag bolt.

After you've made the hole countersunk, pass the three-eighths inch diameter log bolt with a one and half inch washer through the hole. Be sure to tighten that to the wall and that it grabs the stud. If not, be sure to use a lag anchor.

Most commercial buildings use foam polyurethane brackets especially for decorative reasons and under overhangs. These types of bracket, found in all kinds of shapes and sizes, will perk up the look of any building. While many of the foam brackets used are for structural reasons, it can actually be used to give a look as if it is being used for structural support.

If you need restoration brackets, you can find them in the PVC material. However, they are less structural than the cedar or wood material type and can bed used to replace wooden brackets. If you want the look of wooden brackets, PVC materials can be painted to give off the look.

PVC brackets are certainly tough and can be customized unlike foam. These brackets have a matted finish with solid material, which can hold paint.

These types of brackets are installed similar to wood brackets. If you need an easier installation procedure, you can hollow the brackets out by using a strip of dead wood. With them not being structural, this can work out.

Crown Molding
For more information take a look