Clogged Catalytic Converter Symptoms

If you are a person who cares about how your car performs or are conscious about how big a hole the car repairs can make into your pocket then you must spend some minutes of yours to go through the information on clogged catalytic converter symptoms. Catalytic converter is an essential part of the exhaust system in a modern car so as it helps in confirming your vehicles performance with the emission standards. It lies between the engine and the exhaust pipe. Its inner honeycombed structure is made of ceramic and is equipped with metals, such as palladium and platinum to clean the fumes of the burned fuel of the harmful gases. The catalytic converter reacts with the fumes and converts unburned hydrocarbons, nitrogen oxides and carbon monoxide in it into the harmless compounds of carbon dioxide, nitrogen, oxygen and water.

Normally, it is built to last at least 10 years. However, in practice some fail due to various reasons, before the stipulated time period is over, but not without giving enough warnings to the vehicle owner. These warnings have come to be known as the clogged catalytic converter signs or the symptoms of a clogged catalytic converter. Most of the time, catalytic converter problems precipitate into a catalytic converter replacement.

Symptoms of a Bad Catalytic Converter

Any object such as a machine or an instrument, however sturdy, breaks down if it is made to operate beyond its tolerance level. A catalytic converter, which cleans the fumes of pollutants, is built to operate at pretty high temperatures. However, when they get bad or clogged, catalytic converters starts affecting the performance of the vehicle which an astute car driver can easily notice at once. The following is a list of clogged catalytic converter symptoms:

Loss of Power
If you are a person who is not too familiar with the vehicles, then a sure sign of something is wrong with your vehicle is loss of power going up-hill. You can feel your engine groaning, protesting and making a mountain out of a mole-hill. Even a novice at car driving can zero-in on the clogged catalytic converter symptoms such as reduced fuel efficiency.

Overheating Due to Thermal Shock
Inspect the exterior surface of the converter for visible damage. Discoloration and/or warping of the converter housing are indicators of thermal damage to the converter substrate caused by overheating. Thermal failure is usually the result of too rich a fuel mixture entering the converter which contains unburned fuel. This mixture then burns in the converter itself and melts the substrate, causing clogging. A clogged catalytic converter obstructs the flow of gases through it, creates exhaust system back-pressure and affects the performance of engine. Thermal shock also occurs when the hot converter comes into direct contact with ice or cold water, which can cause the interior substrate to crack, resulting in converter clogging, heat buildup and loss of power.

Oxygen sensor is a car part that helps the computer which keeps an eye on the performance of the car. It is positioned in the exhaust pipe and is designed to detect whether the fuel mixture is rich or lean. The sensor conveys this information to the computer which then takes action to maintain perfect ratio of air and gasoline (14.7:1). A bad O2 sensor feeds wrong information to the computer which can affect the performance of catalytic converter. Too rich a fuel mixture causes unburnt fuel to enter the catalytic converter which eventually, results in its damage due to thermal shock.

Rattling Noise Due to Physical Damage
Sometimes flying stone or the debris on road hits and damages the internal organs of the catalytic converter. Such a damage to this car part is visible from the outside in the form of dents. If the ceramic of the catalytic converter is cracked or broken completely then one can hear rattling noises when this car part is thumped on. Over the period of time these lead to clogging of the converter and result in exhaust system back-pressure.

Odor of the Fumes
Fumes leaving exhaust is sulfurous as if it is coming from a rotten-egg is one of the unmistakable clogged catalytic converter symptoms. When one is in doubt about whether the low performance of his or her vehicle is due to clogged catalytic converter or not, smelling the vehicles fume to detect this odor is useful. The cause of this problem is the improper mix of fuel. Unfortunately, this symptom is the last to appear of all the clogged catalytic converter symptoms. Noticing the problem at such later date makes it impossible to carry out any meaningful catalytic converter repairs and generally, means that the owner must be ready to shell out catalytic converter cost.

How to Prevent a Catalytic Converter From Going Bad

• Pyrometer: Once in a while, it is a good idea to test how healthy your catalytic converter is. You can do so at a distance with a pyrometer which is a infrared thermometer. Use it to check the inlet and outlet temperature of converter. If it is more than 200 degree Fahrenheit, then it means that you have a problem at your hand. There are chances that the fuel mixture is too rich. Pyrometer, by bringing the problem of overheating to your notice helps you in affecting timely car repair.
• Back Pressure Tester: It is a device which you can fit in place of upstream oxygen sensor to check the back pressure. Normally, manuals says that should be less than 1.0 psi at idle and at snap throttle, it should not be greater than 4 or 5 psi, depending on the model. Go through your cars manual to update yourself while doing the test.

On noticing any of the blocked catalytic converter symptoms, you must take the vehicle to an expert mechanic who can get to the bottom of the issue. He may test your car's performance by removing the catalytic converter to determine, whether it is the culprit or not. However, beware of the laws in your state regarding the catalytic converter use. In some states, these laws says not to remove this car part on your own. The problem of overheating can also be due to fouled spark plugs, misfiring cylinders, incorrect ignition timing, bad exhaust valves, etc. In this case, finding an agency authorized to do the task is beneficial.