Chair Rail

Chair rail is one of the ways to decorate the interiors of a room. It does it by dividing the large wall into different sections. The chair rail is made from different materials which normally include fiberboard, vinyl, wood and metal. Chair rail was traditionally put up on the plaster walls of the house to provide them protection from any sort of damage from the chairs around in the room. If you are planning to install chair rails in your house, you need to collect some relevant information on them.

Chair Rail Installation
Different shapes and sizes of chair rail are available in the market. Select one which matches your interest. Determine the height where you would like to have your chair. Place the masking tape along this line. This will help you visualize the exact location where the chair rail will be. The chair rail height should reach the center of the height of the walls. However, you may decide to put it a little higher or lower as well. The choice is completely yours.

Now, proceed with the actual process of chair rail installation. Measure and cut some length of the chair rail. This step is quite easy if you have to cut the chair rail at a right angle. But if you wish to cut it at some other angle, perform this step with utmost care. You may get a measuring device from a hardware shop to cut the chair rail in such a manner that you can place it the way you wish to. Measure the chair rail length carefully. First measure the miter corners, interior corners, and then the height of the chair rail. Paint the molding. Make sure that you have done all the finishing work on the chair rail.

In case, you are dividing your room in half with the chair rail and wish to paint the walls of the room, then either paint the walls and put up the chair rail. Place the studs in the wall. Mark it well with a pencil. Now, measure up from the floor. Use a level to draw a line around the room. This will help you get an exact match and will assist you double check what you did in earlier steps.

Chair Rail Ideas
There are several ways in which you can decorate your house with chair rails. Chair rail when put on top of a course of wainscoting looks elegant as well as classic. This idea particularly works well when you trim the wainscot and its top border. Secondly, you do not always need a wainscot to put on chair rail. You may use it all by itself across the walls. You may give the wall an attractive look by painting upper and lower part of the wall with two different yet complementary colors. Thirdly, you may install chair rail along with a wallpaper. Place the wallpaper directly under it. It should be all the way to the floor.

Chair rails have always been a way to add attraction to the interiors of a room. Search for chair rail prices, shape and size which suit your budget, personal choice and interior designing of your house.