Chair Rail Height

A chair rail, also known as a chair rail molding, is what people install to guard the plaster on walls from cracking or getting damaged, when chairs are placed against it. As such, chair rails are found in kitchens and dining areas, where chairs are predominant. However, they may also be used in living rooms and bathrooms for similar reasons. Traditionally, chair rails were used for the purpose of function, but today, form and function have combined to give birth to beautiful designs that fulfill the various aesthetic requirements of your decorating endeavors. For this detail, chair rails are installed along with wainscoting (large wooden panels) below them. These can be further enhanced with laminates of different colors, or other such materials. Wainscoting is not the only option when it comes to adding to the aesthetic value of a chair rail. A lot of home owners choose to highlight a contrast in their wall paint, above and below the rail, which means portion above is a lighter color, and the portion below is a darker color. This detail can also be enhanced with the use of wallpaper of different prints and styles. A lot of people are confused between the standard height of a chair rail and the exceptions made for the purpose of decoration. Here's the answer to your queries.

Average Height of a Chair Rail

Since it is called a chair rail, ideally its height should be equal to the top of a chair back. However, in order to incorporate aesthetics and wall decorations into this functional object, the height may vary anywhere between 32 inches to 40 inches. Technically, the height of the room also plays a part in deciding the height of a chair rail. If the ceiling of a room is low, say around 8 feet to 9 feet, the chair rail should be no more than 36 inches or 3 feet high. Any dimension that is provided to you should be from the floor to the center of the chair rail molding, and not the top or bottom of the molding. If you have a higher ceiling (say 10 or 12 feet), the chair rail can go as high as 48 inches.

Always remember that the height of the chairs that will rest against the chair rail is very essential in determining its height. This is because if your chair has a low back, the chair rail may look out of proportion with the chair. On the other hand, if the chair has a very high back, the standard or average chair rail height will not matter if it does not fulfill the purpose of preventing damage with the chair. You may use the rule of one-thirds when determining the height, so that it does not look out of proportion with the height of the wall. So the height of the chair rail may be one-third of the total wall height.

Finally, when you are considering a chair rail in the kitchen, its height should match the top of the kitchen counter. This means the top of the molding should be in line with that of the kitchen counter. This is so that uniformity is maintained. Mismatched heights will only look ugly. Chair rails have also been used in bathrooms, and here, their height should be in keeping with that of the wash basin or wash basin counter.

Installing a chair rail is quite a simple task and a lot of people opt to do it themselves. However, a little knowledge of wood work is essential in doing so. There are numerous ideas to choose from, and you may use some of the aforementioned ones for some inspiration. Depending on your choice, the chair rail may be a simple curved molding, or it may be intricately carved. Chair rails may also be of varying thicknesses based on your requirements. You may resort to various wainscoting styles, or simply use paint, wallpaper or even tiles to highlight the portion below the chair rail. In effect, the design of a chair rail should be in keeping with the overall theme of the room it is being used in.