Car Wax Buffer

Waxing your car is not only about enhancing its look, but is also about protecting it from harsh environmental conditions. For this, you can either opt for professional service or you can wax your car yourself. If your car has not been waxed for a long time, then it is better to opt for professional service, after which you can wax your car yourself once in every two to three months. In fact, car waxing needs to be considered as an important part of vehicle care and maintenance. Application of wax can give a sleek shine to your vehicle and add depth and richness to the paint. You can wax your car with hand or buffer. A commercial buffer can help you give your car a showroom finish.

Buffer for Waxing Your Automobile

A buffer is an electrical device that is employed for applying wax coat on vehicles. Some buffers can work at quite a high speed to give a sleeker finish to the vehicles. However, high-speed professional buffers should be used with caution. Improper use, especially applying pressure while using the buffer and holding the buffer in one place can damage the car, besides burning the paint. Therefore, all types of buffers, especially the high-speed professional buffers, are not suitable for inexperienced individuals.

Inexperienced individuals should better opt for the buffers that work at slower speed such as a random orbital buffer. The cost of buffers can vary depending on the size of the device and also the particular brand. Before purchasing buffer of any particular brand, it is important to find out the type of buffer you can work with comfortably. A few brands which have earned reputation in the market, and hence can be considered are, Black & Decker, Advanced Tool Design, and Meguiars.

The Right Way to Use a Wax Buffer on Your Car

As mentioned already, a buffer needs to be used with lots of care and precaution. If not used properly, a buffer can leave behind paint burns and whorls that can ruin the look of your car. Therefore, it is important to know how to use a buffer, in order to use it for waxing your car.

Choose the Right Wax
Car wax is available in three forms, liquid, paste and spray. Liquid wax usually does not last as long as the paste. Whatever type of wax you want to use, select the one that does not contain any abrasive substance. A wax that is formulated to be gentle on the car paint is the right product for waxing your car.

Wash the Car
Before applying wax on your car, wash it thoroughly to remove all dirt, dust and grime from the exterior of the car. Proper car wash is a very important step in car waxing. If the car is not washed completely and it contains any residue, then it will become very distinct after waxing the car. For cleaning your car, you can use a gentle soap that is made specially for automobiles. Then rinse the car thoroughly with slightly warm water. After cleaning, dry your car with a clean towel.

Apply the Wax
Apply the wax on your car only when it is completely dry. Before applying the wax, consider covering the cracks and crevices on the body of the car with masking tape. Otherwise, wax would enter these areas, which can be quite difficult to clean up. To apply wax on the car, you will need a small and soft sponge. Moisten the sponge lightly and then dip it in a little wax. Now, apply the wax on the body of the car by rubbing the sponge in a circular motion. Apply the wax in one section at a time. Do not use excessive wax.

Use the Buffer
Take the buffer and spread the wax applied on the car with the help of the buffer pad. Spreading the wax a bit will help you to avoid splattering. However, do not turn on the buffer while doing so. Turn on the buffer once you have spread the wax a bit. Then slowly and gently smooth in the wax applied. Do not apply any kind of pressure while doing so. Gently guide the buffer with your hand, and let it move over the area smoothly. In this way, keep moving the buffer in straight lines following the bodyline of the car. Avoid pushing the buffer pad while doing so.

Remove the Wax
Once the wax applied has dried and attained a slightly opaque or hazy look, you can remove it with the help of the buffer. Place the wax removal cloth on the buffer and run it using long and downward strokes in order to remove wax from the car. Do not allow the buffer to sit in one place, and never work in circles while removing wax.

Use of the buffer can make the entire process of waxing a car much easier and less time-consuming. The buffer can help to apply wax evenly with less effort, unlike manual application of wax. This in turn, can help to enhance the look of your car and increase its longevity by protecting it from harsh environmental conditions, sunlight, and bird droppings.