Best Way to Unclog a Toilet
Clogged toilet can be a nightmare and different measures will have to be taken to unclog a toilet. There are some do it yourself tips, which will help you to get rid of the mess and you may not have to call for a plumber for the same.

How to Unclog a Toilet?
A lot of people are of the opinion, that flushing is the best way to disengage a toilet. However, it is not so. If you realize, that your toilet is clogged, you should not flush more than once. If you wonder, what to use to unclog a toilet. The answer is plunger. More often than not it does wonders to unclog a toiler. We will now see the different methods, which can be used to unclog a toiler.
Proper Way to Plunge Toilet
It is important to know the proper way to plunge toilet. It is necessary, you have the right plunger for the same. You can either use a ball shaped plunger or a fold out rubber flange on the bottom, that will form a seal kind of a plunger. If you have a large plunger, you will have to apply extra force. Now that you have the right plunger, insert the plunger into the bowl and press down firmly, yet slowly. When you press down the plunger, you will have to ensure that the drain hole of the toilet is completely covered with the plunger. To know, if you are doing the right thing, check if the plunger is submerged in water. It is necessary that you push and pull with water and not with air. Next sharply pull up on the plunger, so that suction is created and then push to create pressure. However, you should not push hard, as it can clog the toilet further. With the constant pressure, due to push and pull, it will disturb the clog in both the directions and eventually it will be flushed down. However, you will have to repeat the same steps a number of times, to ensure that the toilet is indeed clog free.
Dish Soap and Hot Water Method
This is one of the best way to unclog a toilet. You will require a little dish soap and hot water for the same. Add about 5 tablespoons of common dish soap to the clogged toilet bowl. The soap sit for about 5 to 7 minutes. Then pour about a pot full of boiling water in the toiler bowl. After which use the plunger. You will not have to use the plunger for more than 5 to 7 times. The same method can also be used to unclog a clogged drain.
Baking Soda and Vinegar Method
You will require about two cups of baking soda and two cups of vinegar. Make sure there isn't too much of water in the toilet bowl. Pour baking soda and vinegar into bowl. Let is sit there for sometime. Then use the plunger a few times. After which you can pour boiling water or normal water in the toilet bowl, but boiling water is better. Plunge a few times and you will have an unclogged toilet.
Wire Coat Hanger Method
If you do not have a plunger, you will ask how to disengage a toilet without a plunger. This is the method for you. If none of the methods seem to give you the desired results, then this is the measure, which you may want to use. You will require a wire coat hanger for the same. The first step you will need to take is to unravel the coat hanger, such that the top ends of the coat hanger are no longer connected. Stick one end of the wire into the drain. Then twist, push and maneuver the wire in a circular motion to clear the drain.
Of all the methods to unclog a toilet, you will have to decide, which is the best way to unclog a toilet in your case. In some cases the plunger method is also able to unclog it and in some cases you will have to use the wire coat hanger method.
Like This Article?
Follow:

Post Comment


